Solix mark waypoint

[Diesel Pro]

Press the mark button twice. Simple enough right? Mine allowed me to set one and then nothing.

Running Solix G1 with 3.420

[Wayne P.]

Yep, two quick pushes of the MARK button creates a waypoint where the position curser is. Either current location or where you move the curser to.

Just did three beside each other and then deleted them.

First generation SOLIX and 3.420

[Diesel Pro]

I tried several times and it would not put them on the screen after the initial waypoint. Had the same issue on Lake MI earlier. I guess I'll have to try again, but it can't be that difficult.

[skeeter james]

Put the cursor where you wanna mark, hit mark button and then check mark button...
Fastest way I’ve found to mark them...

[Hollada]

Search for a similar post I did a while back. There’s a solution, I’m just not sure I can explain it without a picture. If you have an icon in the top of your screen with a redline through it, tap it and the line will go away and you can mark your point. I don’t have an explanation on why that occurs....

[Diesel Pro]

Search for a similar post I did a while back. There’s a solution, I’m just not sure I can explain it without a picture. If you have an icon in the top of your screen with a redline through it, tap it and the line will go away and you can mark your point. I don’t have an explanation on why that occurs....

Thanks I understand what you are saying and will check it out.