Wanting to put lid pistons in a 2017 189 TRX. Would someone that has a 189 please post the brand and parts numbers for the lid pistons on the rod lockers and center hatch compartment.
Wanting to put lid pistons in a 2017 189 TRX. Would someone that has a 189 please post the brand and parts numbers for the lid pistons on the rod lockers and center hatch compartment.
Signature Series part# SX150P-40. (You will need one for each rod locker; total of 2.)
Signature Series part # SX150-60. (This is for the center storage compartment. You will need two of these.)
Thank you
I think its same as 18TRX. Be glad to get you dimensions if needed.
Here’s configuration and bracket location on center storage:
6DCAFE63-6D3A-4107-A298-999C84A3A7DB.jpeg 471F37B6-CFD2-4922-ADE8-7E9182EA394A.jpeg
Rod/Storage compartments:
B1B9377F-E72D-4307-92FA-00E620ABA8CF.jpeg D9CF0B37-2F1E-4369-86B5-08120CECD9ED.jpeg CE3801A8-1EC1-4322-B192-DF0C4B851A94.jpeg
Jeff White
2017 Triton 18TRX
200 ProXS
Thank you. Those pictures are helpful. Does the brackets that the pistons connect to have a part number?
No part# stamped on brackets. Attwood has several different brackets on their website.
Rod locker i think is this bracket http://www.attwoodmarine.com/store/product/SL65-Bracket
Center hatch is similar to this but don’t think this is correct one. http://www.attwoodmarine.com/store/p.../SL46-Bracket0
Jeff White
2017 Triton 18TRX
200 ProXS
Call Bunch Marine in Tn. and they can tell you.
Need some too best place to buy all of them with hardware for mounting???
I got the exact springs mentioned in post #2 above from Siraweb.com. The mounting brackets for the center compartment is RV Designer G845. I got these from RVUpgrades.com. The brackets for the rod lockers I got from my local marine dealer. They were Atwood SL65. I mounted the brackets to the fiberglass with bolts and nuts and to the metal with 3/4 screws. I got all bolts washers and nuts from Lowe’s. I used size 10-24 for both. I would recommend that you tighten up the screws holding the hinges before installing the gas springs.