Flashed

[mlhjr1]

I'm running 2018 skeeter fx20LE arms had mine 250 SHO flashed. Prop wise I'm running T2-25p. Atlas hydraulic plate

with the flash I still can't break 6000rpms I was under impression I'd get 6500 or so?

5800 is ,max I'm getting. I've run it with plate up. All the way down. Can't get 6000

is there a way to see if my flash actually received the flash?

thanks

mo

[kk4iz]

What holes is your motor mounted in. You should lose water pressure if you go up too far or blow out and if you blow out rpms will max out

[mlhjr1]

i beleive the mount you are seeking was I am on the 4th hole..

[kk4iz]

put it in the top hole and run it. That is the best way you can alway come back down but most likely you want have too. That is if you have ran your hydraulic Jack plate all the way up.

[Cstrode55]

You need to have your prop matched to your flash and as far as the flash rpms go, that’s something that they would’ve asked you up front. A lot of people that have still warranty get limiter set to 6200.