Taylor made is what i'm using know. Power poles wont touch the bottom at our ramps..
Taylor made is what i'm using know. Power poles wont touch the bottom at our ramps..
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
https://www.akuaboatfenders.com
Just bought a set work great
Vince Dart- Jim Thorpe PA
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
I went with the vinyl 6.5"x23"(???). I hung them vertically on front and rear cleat and I felt I wasnt getting enough cushion when I was pull up to the docks. So I tried some 8.5"x26" and they are comically huge on the 1880 lol.
So I got some bungy line and tied onto both eyes of the 6.5" bumper. I now have my bumpers horizontal and up high. Just slightly below the gunnel and I feel it provides plenty of cushion now when I pull up to the dock.
I still want to install an additional cleat right next to the console.
For the cheap peeps like me I made some dock sticks for around 8 bucks. They are very easy to make. I also hang a throw cushion off the throttle lever.
Vince Dart- Jim Thorpe PA
These work too https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
They are made by Rite Hite.
These and Dock Stix work under the right circumstances...not a end all though.
2020 Vexus AVX 1880
Evinrude E-Tec 135 HO
Ultrex
Lowrance
Crankwv,
I'm interested in how you made your homemade Dock Stix. You have any pics of them?
Made my own dock-stix have less then ten dollars in the pair