Has anyone added boat buckles to a mid 90s trailer. I bought some and would like to see some pics of how you did it.
Has anyone added boat buckles to a mid 90s trailer. I bought some and would like to see some pics of how you did it.
I don't have good pics, but I have them and they rock. I think I had to use some 90 degree angle adapters from the hardware store. here is a pic, just not up close.
DSCN1210.jpg
25th Anniversary Champion 187 SCX Elite
Mercury 175 EFI
Perception Pescador Pro 120 Kayak
Aquos 10ft Pontoon Boat
Thanks, I was going to bend up some steel flat stock and do the same.
I just mounted mine in the hole that is there for the original tie down. It sits perpendicular to the back of the boat, but works great. Not my boat below, but similar orientation.
I did mine exactly like the pic in Lagniappe's post. They work great. The hardware with them sucked though. Get better bolts and nuts.
I forgot to add- mine is a 99 Dri doc trailer
Yes I have them on a 2000 trailer. They work great
20190712_162433.jpg
You'll need brackets
1995 Champion 190 dcx Elite
Seems like on the Ranger my dad used to have they were removable. I think I remember taking them off before we launched. These only came with a bolt and nut to bolt direct.
Right, you bolt it to the trailer then just strap the boat down. No worries about losing them, etc. I have mine mounted to the original tab on the trailer (01 187), works great.
2001 Champion 187 Yamaha 175
12' Talons, Lithiums and Garmins
All pulled by a Hemi