Guys,
Boat has ran great all summer long until I had some power issues with a failing battery. I had a big pm1 starting battery fail 4 years old. I replaced with a 31 agm Duracell and now I have no trim, no power at the key. I have power at my accessories; livewells, pumps, lights. Just nothing at key. I checked to see if power was getting to starter and yes it has it. Can you guys help?
did battery installer miss hooking up a wire? pdp issue?
2022 z519 cup 225 merc 4s ser # 3B210484. 2--hds12 live units. 2 poles, atlas plate, ghost, hamby's, active target, merc digital gauges
2002 basscat pantera 3 (dad bought new) sold 8-2-22
2000 stratos 20 ss (bought new) 200 hp Rude ficht great boat/motor sold 11-21
pulled by a 2500HD Denali
proud dad of an ARMY Captain
MAGA
ASE/GM Master tech before tools
I installed the battery myself. I was wondering about the pdp. Is there a way I can test it?
I have power to the pdp....the 10amp fuse between the relays was okay.... I checked for voltage on both leads where fuse plugs into the pdp only the right lead had power.
Guys ...i took pdp off split the plastic housing ...and waaaalaa broken solder connection on main power wire .....resoldered the connection ....sealed the pdp and now we have power Houston.
You would do well to have the PDP refurbished.....there may be others....
Good deal brother, those simple problems cause the most heartache
Can’t believe they charge almost 600 bucks for a new pdp...... ridiculous
Somebody on here said CDI quoted him 210.00 to refurbish his pdp.
If you are good enough with that soldiering iron you can do it yourself. The solder used in the production of the early PDP's did not have lead in it and caused failure. You can use a solder sucker or wick and remove the old solder and add new solder.
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
Reply With Quote