Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Oct 2012
    Location
    Wallingford, CT
    Posts
    921

    1994 180 pro, can’t find a relay switch for the livewell

    According to the schematic there is a relay switch for the livewell timer, I can’t find it, any suggestions appreciated!

  2. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,089
    #2
    Often a red cylinder hanging from the wires near the livewell switch. Similar to this https://shop.bulletboats.com/Product...ctCode=LWTimer
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​

  3. Member texasbass1's Avatar
    Join Date
    Jun 2009
    Location
    The Colony, TX
    Posts
    728
    #3
    On my 92 it is a circuit plate near the switches under the dash. If I remember this week I'll try and take a picture to see if it helps.
    Pat Leach

    USAF MSgt Retired

    1992 Procraft 180 Pro
    2016 Mercury 150 Four Stroke
    2018 Minn Kota Ulterra
    Helix 7 SI/GPS
    Helix 7 Sonar/GPS


  4. Member
    Join Date
    Oct 2012
    Location
    Wallingford, CT
    Posts
    921
    #4
    Thx TB1

  5. Member texasbass1's Avatar
    Join Date
    Jun 2009
    Location
    The Colony, TX
    Posts
    728
    #5
    Raptor, I hope this helps. This is from under the dash.

    0825191139-00.jpg
    Pat Leach

    USAF MSgt Retired

    1992 Procraft 180 Pro
    2016 Mercury 150 Four Stroke
    2018 Minn Kota Ulterra
    Helix 7 SI/GPS
    Helix 7 Sonar/GPS


  6. Member
    Join Date
    Oct 2012
    Location
    Wallingford, CT
    Posts
    921
    #6
    👍

  7. Member texasbass1's Avatar
    Join Date
    Jun 2009
    Location
    The Colony, TX
    Posts
    728
    #7
    I have a wiring diagram as well if you need it.
    Pat Leach

    USAF MSgt Retired

    1992 Procraft 180 Pro
    2016 Mercury 150 Four Stroke
    2018 Minn Kota Ulterra
    Helix 7 SI/GPS
    Helix 7 Sonar/GPS


  8. Member
    Join Date
    Apr 2019
    Location
    Somerset, Pa
    Posts
    608
    #8
    https://www.ebay.com/itm/Skeeter-boa...-/171366264085

    I had a 1997 Procraft 180 bass and mine went bad also. I found one and I put a link with the part#, I think this should help you. I did not pay that much for it. Google the part# and you will find it and a better price. I think i paid like somewhere in the range of $20. If you have any problems get back to me and i can get you in touch where i got it.