Anyone having trouble with water laying on the little ledge to the right side of the cooler. I usually keep my sandwiches there and wondering if I drill a drain hole there will it drain into the bilge area?
Anyone having trouble with water laying on the little ledge to the right side of the cooler. I usually keep my sandwiches there and wondering if I drill a drain hole there will it drain into the bilge area?
following
Yes, mine always holds water.....i just dont put anything up there if i dont want wet....
They could have at least put a notch on it to keep it drained..
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
Yup , I drilled a hole. Have not had any water on it since. Also check the little drain holes in the two compartments on the left side of the cooler. Mine plugged up in a big rain storm and filled with water
yes , it will drain into bilge area
great thanks
So the water that will be draining will it get the spray foam saturated over time?
YOU are not entitled to what I have earned!!!!!
I'm not sure what you mean ?Originally Posted by fishin couillon
I just use Yeti ice blocks. Keeps my cooler cool all day and pretty much dry maybe a little sweat.
A.J. Kelty Versailles KY
2021 Phoenix 920 Elite
yep there is a lot of foam under the shelf that would soak up water, I have looked at putting in a plastic tube to get it past the foam, just haven't come up with the right fitting to hold the tube, most have a lip on edge and wont let the water drain all the way
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Under the cooler they spray foam to help with keeping it cool, so if you just drill a hole and let the water run out the foam will soak it up....so then you may have an issue.....but like Drew mentioned you would need to put a tube to make sure it gets past the foam.....
YOU are not entitled to what I have earned!!!!!
They do need to put a notch so it drains into the big part of the cooler
Ok , I ran out and checked the hole I drilled on the ledge of the cooler . There was so little foam there i just took a screw driver and just reamed the the hole out a little, now no foam in site it's strait down to the bilge now.
yes, so simple
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Mine has a cut out, maybe it was a new change for 2019?
2019 Phoenix 920 ProXP
Mercury 250 4S ProXS
picture please
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Here ya go Andy.picture please
rsz_img_7463.jpg
2019 Phoenix 920 ProXP
Mercury 250 4S ProXS
Hey, lol. What do you know. Those guys stay on top of this stuff.
they are listing , there has been a lot of things fixed that we all talked about and then it happened.
Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
910-722-0001 call or text
info@drewcraft.com
Well I need them to replace my cooler.....
YOU are not entitled to what I have earned!!!!!
Reply With Quote