Is there any way to get three 31 series batteries all placed on the port side. I would like to use the middle area for storage.
Is there any way to get three 31 series batteries all placed on the port side. I would like to use the middle area for storage.
No, I have 4 group 31's. 1 AGM cranker and 3 wet cell. Have to use middle area for 3rd trolling battery. had to put spare prop in port rear storage compartment.
Yes, but you have to change over to lithium.
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC
I am switching to Relion AH100 Lithiums
Should fit then. You will like those lithium's. I wish I would have done that years ago.
yes you can put 2 side by side in battery trays on the port side and one in front of your charger in a battery tray and your cranking battery on your starboard side in a battery tray all group 31s that's how I did my Z521C and my power pole pumps are behind my battery charger mounted to a quick release tray I remove 4 screws holding the charger then pull it to the side and slide out my pumps.
Not going to get three group 31's in the port side on mine. Too small.
Last edited by mikesxpress; 08-12-2019 at 04:57 AM.
I have 3 Battery plus AGM batteries mounted in the right side. Send me a phone number and I will send you a picture. Do not know how to post a picture on here. Not easy to put 3 75# batteries in a small hole but put 3 in the right side on my 2013 Z520c Thank’s to Angler’s Choice in Lexington NC. Send me a pm to send you a picture of the battery installation
I left out that they are 3 group 31 x2 Battery Plus batteries
Ted AC put three X2's in that area without modifications of the pultrusion? I want to see that.
Van at BBT says his three battery tray will fit the on the port side of a Z520c. His tray looks like another great product for BBT.
Just sent you an IMOriginally Posted by BluRanger
Mike Pres I sent you PM
Reply With Quote