Page 1 of 2 12 LastLast
Results 1 to 20 of 36

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Jan 2009
    Location
    campbellsville, ky.
    Posts
    279

    Expected speed 21 XDC

    What would be a average speed for a 2003 21XDC with a 2014 250 pro XS , 1.75 SM , 29 pro max, 1-1/4" above pad. 14" jack plate with 2" spacer's 16" total setback . Turning 6,000 rpm. 1/2 tank of fuel , no water in live well, ultrex 80 TM. moderate amount of tackle most in rear boxes , 220 lbs. driver and 150 lbs. passenger , seems like 78 mph is all i can get. Running 3/4" above pad turning 5,800 rpm same speed . is this about avg.

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,483
    #2
    I think a 28P Promax would be faster. I would think 3/4-1 inch below the pad would be better with less pitch.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Member
    Join Date
    Mar 2010
    Location
    Selma N.C.
    Posts
    1,681
    #3
    Quote Originally Posted by 21XDC View Post
    I think a 28P Promax would be faster. I would think 3/4-1 inch below the pad would be better with less pitch.
    This! 29 is too large.

  4. Member
    Join Date
    Sep 2016
    Location
    Mobile, Alabama
    Posts
    309
    #4
    Quote Originally Posted by rclark1 View Post
    This! 29 is too large.

    not with 1.75's IMO
    2013 20XD/ 250XS

  5. Member
    Join Date
    Mar 2006
    Location
    Wilmington, MA
    Posts
    2,253
    #5
    You should get 80mph with 2 , 82,83 solo
    ​BULLET 21XRS 250 SHO

  6. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,447
    #6
    If you’re runnin above the pad you prolly need to ditch the sporty for a TM lower...
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  7. Member
    Join Date
    Aug 2016
    Location
    Colbert co. Alabama
    Posts
    3,455
    #7
    Quote Originally Posted by crank68 View Post
    If you’re runnin above the pad you prolly need to ditch the sporty for a TM lower...
    That makes no sense. Sportmaster is designed to run higher that the TM. OP said he is 1-1/4 inch ABOVE pad.

  8. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,483
    #8
    I missed the SM part... I think it may be the weak link with a load.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  9. Member
    Join Date
    Jul 2012
    Location
    Maumelle, AR.
    Posts
    5,422
    #9
    Sporty will work if you run light, had one on my 2004 21XDC with a 2005 250XS with1:62's ran 87.8 a few times, but from what you posted, you need a TM

  10. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,447
    #10
    As long as it’s a TM he can run it below but if it’s a SM and run it below ..... gonna be slowwwww...
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  11. Member
    Join Date
    Jul 2012
    Location
    Maumelle, AR.
    Posts
    5,422
    #11
    Quote Originally Posted by crank68 View Post
    As long as it’s a TM he can run it below but if it’s a SM and run it below ..... gonna be slowwwww...
    Yep

  12. Member
    Join Date
    Jan 2009
    Location
    campbellsville, ky.
    Posts
    279
    #12
    Quote Originally Posted by crank68 View Post
    As long as it’s a TM he can run it below but if it’s a SM and run it below ..... gonna be slowwwww...
    So your saying a sportmaster 3/4" below pad is slower than a TM at 3/4" below pad ?

  13. Member
    Join Date
    Aug 2008
    Location
    Spencerville
    Posts
    1,805
    #13
    Yes for sure.

  14. Member
    Join Date
    Aug 2016
    Location
    Colbert co. Alabama
    Posts
    3,455
    #14
    Respectfully, I don't think so.
    Keep in mind the OP is running above the pad.

  15. Member
    Join Date
    Aug 2008
    Location
    Spencerville
    Posts
    1,805
    #15
    TM below pad will be quicker than Sporty below pad. TM will carry a load better on a 21xd.

  16. Member
    Join Date
    May 2006
    Location
    Sturgeon Falls, ON
    Posts
    1,624
    #16
    We ran both a sporty and a TM on Canadabullets 21XDC/250XS with moderate load 2 guys, At 1/2" below pad they both ran identical speeds. Sporty was faster light load, the TM was faster when you loaded basspro shops in the boat. I know most guys think a TM is better but To me personally its a coin toss which one is better. They both have there advantages.

  17. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,447
    #17
    IMO...above or below the pad, a sport on a 21 with a “load” will not carry the weight a TM will.
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  18. Member
    Join Date
    Aug 2016
    Location
    Colbert co. Alabama
    Posts
    3,455
    #18
    Quote Originally Posted by crank68 View Post
    IMO...above or below the pad, a sport on a 21 with a “load” will not carry the weight a TM will.
    Ted, you may very well be correct. I disagreed only because I did not think a TM could be run above the pad. A member here has a 21SS with a sporty on a 300XS and posted a video on BBC of him running 102.
    IMO, a sporty above the pad will be faster than a TM below the pad when the TM is below the pad a normal amount as in 2-3 inches below even on a 21. You will give up some hole shot. But, I have no direct knowledge and you may be correct.

  19. Member
    Join Date
    Sep 2016
    Location
    Mobile, Alabama
    Posts
    309
    #19
    My buddy runs same setup 29 promax with a TM 1.62's below pad 82-84.
    2013 20XD/ 250XS

  20. Member
    Join Date
    May 2006
    Location
    Sturgeon Falls, ON
    Posts
    1,624
    #20
    Quote Originally Posted by rock2033 View Post
    My buddy runs same setup 29 promax with a TM 1.62's below pad 82-84.
    RPM must be pretty freaken low. A 29 promax ran 97mph@6000 rpm on my rig with 1.62.

Page 1 of 2 12 LastLast