Page 1 of 2 12 LastLast
Results 1 to 20 of 28
  1. #1
    Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351

    Who makes this mold?




    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  2. Member
    Join Date
    Dec 2011
    Location
    Lima, Oh
    Posts
    2,707
    #2
    Mike that is an odd one i have never seen that before this is interesting where do you pour in at

  3. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #3
    I bought 2 of these and will machine the pour hole and veins to all 3 cavities.... I should have them in 3-5 days. Seller said they were Do-It Molds... I knew they were not.


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  4. Member Especial Bryanmc57's Avatar
    Join Date
    Aug 2004
    Location
    Mineola, TX
    Posts
    16,701
    #4
    Can you identify the language written on them?


    Honora Primum Vel Nullum Omnin Honorem

  5. Moderator Mark Perry's Avatar
    Join Date
    Jun 2004
    Location
    Runaway Bay, Texas
    Posts
    82,545
    #5
    With the size of the front portion of that body you might want to consider adding a couple of vent lines as well. It might not shoot well without them.

  6. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #6
    Yes Mark. I will try w/o first. Then vent if needed. I think it’s from the Ukraine

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  7. Member
    Join Date
    Dec 2011
    Location
    Lima, Oh
    Posts
    2,707
    #7
    i have never seen them made like this if you would Mike post picture of finished product

  8. Moderator Mark Perry's Avatar
    Join Date
    Jun 2004
    Location
    Runaway Bay, Texas
    Posts
    82,545
    #8
    Quote Originally Posted by 21XDC View Post
    Yes Mark. I will try w/o first. Then vent if needed. I think it’s from the Ukraine
    Mike,

    Check out www.bugsmolds.com or best NJ on Ebay as I think it may be one of those. Weird they cut it without the openings though.

  9. Member
    Join Date
    May 2015
    Location
    Traverse City, MI
    Posts
    938
    #9
    Throw a picture up when you get it filled. Are you going to make it injection or lop the top off and open pour it?

  10. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #10
    I hope I can make these work... This is what the mold was designed for. Seller didn't know anything about them.


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  11. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #11
    http://www.voblery.net/index.php?rou...roduct_id=1610


    I'll keep you guys posted when I get these in hand... 60mm, 80mm, 110mm are the 3 sizes.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  12. Great Lakes Captain RangerTim619's Avatar
    Join Date
    Aug 2004
    Location
    Swanton, OH
    Posts
    1,121
    #12
    I will be needing some of those in green pumpkin. When you get it up and running.
    Ranger 619 * Honda 200* Minn Kota* Humminbird *Garmin
    Fenwick *Abu Garcia

  13. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #13
    Quote Originally Posted by RangerTim619 View Post
    I will be needing some of those in green pumpkin. When you get it up and running.

    Not until after a few fishing trips on Columbia.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  14. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #14


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  15. Member
    Join Date
    Mar 2017
    Location
    Westport, Washington
    Posts
    1,508
    #15
    Interesting videos using the foam.

  16. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #16
    Tracking says I'll get them both on Monday. Kind of excited to see them in person. I may have to modify the mating of the 2 halves, Because foam has a lot of forgiveness. I cant have flash.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  17. Member
    Join Date
    Mar 2017
    Location
    Westport, Washington
    Posts
    1,508
    #17
    Please be sure to give a follow up on this. Thanks!

  18. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #18
    I didnt get these cheap, I paid almost $120.00 for both. It may have been a waste of money, But I'm trying it anyway. I like the look and think the action and sizes will be a good fit for my needs.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  19. Member
    Join Date
    Oct 2007
    Location
    Hagerstown, MD
    Posts
    4,194
    #19
    [COLOR=rgba(0, 0, 0, 0.87)]Я продаю невежественному Майку награду


    [/COLOR]

  20. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #20
    Quote Originally Posted by Munkin View Post
    [COLOR=rgba(0, 0, 0, 0.87)]I am selling the ignorant Mike reward[/COLOR]

    Really? Care to explain?
    Last edited by 21XDC; 08-11-2019 at 08:10 PM.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

Page 1 of 2 12 LastLast