It only shows up on color option #1. And it's everywhere I go. If I select another color option it going away.
It only shows up on color option #1. And it's everywhere I go. If I select another color option it going away.
It's the FishReveal feature.
There is a difference in depth readings between your 2d sonar transducer and your Downscan transducer. You are seeing the shallowest echo from the 2d transducer overlaid on your Downscan image.
If bothersome, you may be able to use the structure scan offset feature to line them up.
2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D
I saw the same thing on mine. I adjusted the settings for fish reveal to make them not constant. I'll check the settings for you tomorrow.
2012 Stratos ChampioN 183 Elite
Mercury 175 ProXS
i get that alot always wondered bout it...
Mine does that when I have the fish reveal turned on
Split your screens. Have Sonar on a panel and Down Scan on the same one and it helps anglers learn how Fish Reveal works.
2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D
You might get the line even if the tranducers are perfectly aligned, like when using 3 in 1. The different coneangle of 2D and DownScan means they will only draw the same bottom-line as long as that bottom is 100% flat and even within both coneangles.
2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D
TrackerUser