-
PT190 Prop Selection
The boat is a 2007 Tracker PT190 w/ 90HP Optimax on a 6” Atlas jack plate. Currently I’m running a 13.5/22P Laser II, the boats max speed is 36-37mph and rpms before starting to trim are about 4900rpm and once trimmed just before the point where I start to lose speed is about 5200-5300rpm. Was looking to get more lift out of a prop and higher rpm. What do you guys recommend? Ask away any questions I did not answer, the things are just so expensive I don’t want to make a mistake and get the wrong one. Thanks.
-
Also meant to add I was looking to go to a 4 blade prop, either a trophy plus or spitfire if you guys recommend either of those. Would I need to get a lower pitch to compensate for a 4 blade prop compared to a 3? Thanks again.
-
I cruise at that speed, and max out at 45. You may have too much pitch. Mine is an 01 with quite a few hours on it and a 20p prop, and it maxes out at about 5300. I usually run at 4000 rpm, only open it up occasionally for short periods. Something doesn't sound right with yours.
-
Yeah my original problem was my tach was reading wrong and was reading a few hundred extra rpm, so I bought a prop based off that. A few weeks ago it had an issue where it was reading even higher so I gave it a smack and now it’s reading perfect. Spoke to a prop shop about my engine and prop issue and the guy recommended a 19p Trophy Plus and he said that should dial it right in where I need to be. Ill keep everyone posted. 22P Laser II for sale!! Lol!