Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Oct 2008
    Location
    Buhl, Idaho
    Posts
    125

    Bravo 1 vs Fury 4

    Can anybody give me an idea of the top end rpm comparison between a Bravo 1 and a Fury 4 in the same pitch?

  2. Member
    Join Date
    Mar 2017
    Location
    Tuscumbia, AL
    Posts
    1,069
    #2
    The fury 4 runs much stiffer, at least 1-1.5” stiffer some would even say 2”. I think about 1.5” but it varies due to the bravo being only even pitches so some of the +1.5” props run a little strange.

  3. Member
    Join Date
    May 2014
    Location
    Sussex, Wi.
    Posts
    390
    #3
    Following!

  4. Banned
    Join Date
    Feb 2007
    Location
    NV
    Posts
    9,120
    #4
    Im running Bravo 1 with all holes open. This thing jumped out of the hole and will put you in your seat if you punch it at 35mph. Lots of lift also.

  5. Member 71bambam's Avatar
    Join Date
    Oct 2009
    Location
    Sturgeon Lake Minnesota
    Posts
    1,646
    #5
    I run a 24 fury 4 at 5900 and a 25 fury 4 at 5800 a 26 bravo 1 xs 5900 merc 200 efi

  6. Member
    Join Date
    Mar 2017
    Location
    Tuscumbia, AL
    Posts
    1,069
    #6
    Quote Originally Posted by 71bambam View Post
    I run a 24 fury 4 at 5900 and a 25 fury 4 at 5800 a 26 bravo 1 xs 5900 merc 200 efi
    What boat and do you run them all at the same ptp?

  7. Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #7
    Usually the bravo will be 1-2 mph slower on most boats but is better at everything else. You also have to pitch up when changing to a bravo because they are lite on pitch.