Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Feb 2017
    Location
    Ca.
    Posts
    25

    Dimond clear question

    How long to you wait before doing a second coat? Also do you turn or not turn? I would appreciate any advice.

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #2
    I turn my baits, I hang jig heads...





    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Member
    Join Date
    Feb 2017
    Location
    Ca.
    Posts
    25
    #3
    Thanks

  4. Member
    Join Date
    Feb 2017
    Location
    Ca.
    Posts
    25
    #4
    The painting process has been fun. The clear coating process has been pure hell

  5. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #5
    There is a learning curve...

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  6. Member
    Join Date
    Feb 2017
    Location
    Ca.
    Posts
    25
    #6
    How long do wait before turning. I also have hard time keeping the eyes from clogging

  7. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,351
    #7
    I let it drip into a garbage can until the drips are about 7-10 seconds between drips, Then turn. Use a tooth pick, to poke out eyes in a few min. I use my air brush/air only on low pressure sometimes. Or I use a dremel tool with a small cone bit after they dry.


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html