AT2 plug to remove transducer

[Tetontrouthunter]

I have an AT2 setup on a See Lite Pole on my 2025 Lund using the sport track. Currently my black box is under the console and I have the transducer run through a rigging tube up to the bow. I would like to be able to remove the transducer from the boat on days that I don't plan on using it. I can't seem to find a "receptical" to mount on the bow that I could plug and unplugbthe transducer into. My only idea is to get a 10' extension and put it through a receptical designed for an AC plug like on my onboard charger.

[Basshopper]

Be prepared to have some image issues by doing that. if Lowance does not make an extention cable for that transducer there is a reason and mostly it will cause issues. if you really want to do that just run the cable along the gunnel you and take off the bracket and and roll it up and put it in the compartment with the box shut off never run the Transducer out of water it will heat up and cook itself and shorten the life of it.

[Anders Eriksson]

Lowrance have a extension cable
https://www.bluebottlemarine.com/pro...e-10ft-3m.html