Hey guys,
Does anyone have dual anchors on a 1980CC or 2180CC? I'm looking to install some on my 2180CC but it looks like the ladder will get in the way on the port side. Thanks!
Hey guys,
Does anyone have dual anchors on a 1980CC or 2180CC? I'm looking to install some on my 2180CC but it looks like the ladder will get in the way on the port side. Thanks!
I have a 1980cc and you are right, the ladder is in the way. I just cut the bottom part of the ladder off with a pipe cutter. I only have one step on the ladder, but didn’t have to seal the holes since I didn’t take the ladder completely off. The dual poles were more important than having the full ladder.
Awesome, thanks bud. Any chance you can take a pic of what it looks like after you cut it down? Also, have you noticed any increase in draft from the extra weight of the PPs?
Give me a couple of days and I will post a pic. The poles are actually really light on the transom and I haven't noticed any difference in draft, speed, or handling.
Great, I appreciate it!
IMG_2126.jpgIMG_2125.jpg
The ladder is marginally usable with only one step, but was a better solution for me than removing the entire ladder.
@hardnibbles - first of all, thanks for posting and for helping out Halfspin19. I have an AVX1980 and have been wondering how to deal with the later when I install Power Poles. This is very helpful. I have two additional questions - no hurry. Which Power Pole model did you install? And it looks like you do not have a jack plate, which brackets did you choose?
Thanks for the pics and info!! I'm definitely gonna be mounting to my jackplate. Just like you, I don't want to remove the ladder completely and have exposed holes
@Halfspin19 - no problem. If you have any questions, I will help when I can.
@TDWalk - I have 8’ pros. I don’t have a jack plate so had to install a “M to S” between the motor and the transom. Then ‘S-2-2’ mounts to the ‘M to S’. If you have questions, contact Hydrilla Gear. Not only do they have the best prices, but also customer service.
@hardnibbles - Thank you very much for the information and the Hydrilla Gear recommendation.
Huge thank you for this @hardnibbles. I just got a 2180cc and I wasn’t sure what to do about the ladder with installing the power poles. Also its very tight in the back compartment for the pumps. Waiting on a response from Vexus but saw on another BBC thread that there is a mount Vexus sells. Curious how the pump install went for your boat?
It wasn't as bad as i thought it was going to be, but i don't know the differences between the 1980cc vs the 2180cc in that compartment. I did it all myself and i'm far from a mechanic or anywhere close to mechanically inclined. It may not be pretty, but I did it myself and they still work after a year.
pumps.jpg