Since Fish Obsessed is out of stock

[Rude520]

Going to upgrade my 32 to a 34. Want to put a zero degree perspective mount as well. What else is out there? I would prefer to have a dominator mount but that doesn't appear to be anytime soon.

[Bill Reynolds]

Going to upgrade my 32 to a 34. Want to put a zero degree perspective mount as well. What else is out there? I would prefer to have a dominator mount but that doesn't appear to be anytime soon.

This May be a help: check post number 6 8n this thread.

https://www.bbcboards.net/showthread.php?t=1262121

[Bryanmc57]

I've been pretty happy with the Summit Fishing Equipment mount.
https://summitfishingequipment.com/c...p-installation

[78Staff]

I have a Fish Obessesed - it's a good mount. But honestly, the Rytek which I also have is a better mount. It's also more expensive, but it's all metal, infinitely adjustable, and easily swappable/moveable to different mount locations it TM, Pole, Kayak, etc. It's essentially a "better mousetrap". There's nothing wrong with the FO, its very popular for a reason, but it does have a few minor issues - the mount bolts for the transducer work themselves loose if you flip the td around a lot - and you bascially have to completely disassemble/remove the mount to tighten it back up. You can't use typical blue loctite as it will eat the polymer - so you have to buy the special plastic safe loctite 425 which is like $30 for small bottle. Also if you are running AT, the various ratchet positions may not line up well with what you want to see, resulting in "dead space" on your screen. Garmin's software can correct for this, but AT doesn't do it very well, as it's super sensitive to transducer angle.

Anyway, not bashing the FO, it's a better mount than stock and a reasonable price. But imo the Ryteck is a better solution, despite the higher price.

https://rytekmarine.com/collections/...e-sonar-mounts

[2dwoods]

And it sold out too

[78Staff]

And it sold out too

Yeah Ryan builds them in batches - but they should be available any day now.

[RyTek Marine]

Yeah Ryan builds them in batches - but they should be available any day now.

Out for anodizing this week...252 back on the website first thing in the morning on May13th!!! Had a major lathe break down that set me back almost 2.5 weeks unfortunately

[CaymasRodney]

Sent you a pm

[RyTek Marine]

And it sold out too

Hundreds back in stock now!!!! Sorry for the delay.

Ryan

[st041986]

I was able to place an order for a FO LVS32 Quest Dominator kit today.