Has anyone installed a ashmore dash plate on an x series?
Has anyone installed a ashmore dash plate on an x series?
a TR but not a TRX if that helps ?
Installed one on a 20trx. Perfect fit
2018 20trx
250 pro xs
lowrance ghost
powerpole blades
I put one on my 2007 TR 21X 2 years ago. Fit was good but wasn't "perfect" and the material is stout, so it doesn't bend or flex much at all! It's worked well and the dual braces for added strength and support are the real deal! Recently I've been thinking that I might try heating it up a little bit and see if I could soften it up enough to put just a little more curve into it. It works well as it is, but my OCD says try to address that tiny bit bothering you while my more sensible side says leave it alone you idiot you'll probably end up making it worse! :)
2007 Triton Tr-21X
2007 Mercury Optimax 250 PRO XS
S/N 1B480738
Mfg date Mar. 2007
I got one of the first dash replacements from Ashmore. I've had a single 12" mounted since installation. You have to look around graph to see tachometer. Seeing gas gauge and trim are easy. I'm converting mine currently to a solid dash using Ashmore as a template moving gas gauge to the lower 3 gauge area and not having a trim gauge. I also fabricated another stainless steel piece in the middle of the two that came with the Ashmore panel. I'm installing a mercury link to get motor data to the 16" lowrance.
IMG_0273.jpg
2005 Triton TR20X-Mercury Pro XS 4.6L V-8 250 HP Serial # 3B378953
2016 Harris Cruiser 24-2016 Mercury150XL-Serial # 2B232319