Got an overheat alarm on my OX66 150 VMax today while idling to take off from ramp. Has a new water pump and new water pressure gauge. Tell tale is peeing, but no water pressure on gauge. Could there be trash in the cooling system around the heads?
Got an overheat alarm on my OX66 150 VMax today while idling to take off from ramp. Has a new water pump and new water pressure gauge. Tell tale is peeing, but no water pressure on gauge. Could there be trash in the cooling system around the heads?
Chad Aucoin
Ranger 185vs
150 VMax
Did the O-ring fall out of the pump when it was being put back together? Did someone mess with the water pickup screens on lower unit? They can be installed backwards. Can be alot of things.
2008 Ranger 178VX
150 Yamaha V-max
GO Fins!!!
Mine was doing the same thing when I got it. The bottom o-ring was lunched when I took it apart.
Clean poppet valve/ PRV pressure relief valve.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Thanks for the tips everyone. Ended up being a missing grommet between the pump and the water tube in the housing allowing too much water to escape out of the lower unit. Fixed up and full pressure now!
Chad Aucoin
Ranger 185vs
150 VMax