Search:

Additional derails I forgot to mention. Once you drill the hole...rempve the pedestal and clean inside of base to remove metal. Or it will rust. Prime and paint bare metal at base of threaded...

I have tried rubber and felt...neither worked. Buy a 2 inch long by 1/4" diameter pin from tractor supply that has a locking mechanism that will keep it from falling out. Put pedestal in the base...

Twice I have had this battery leave me OTW unable to crank my Yamaha 115 SHO. After 12 hrs of running two HDS 9s. Battery is less than 2 yrs old...always plug in with trip pro professional 15amp...

Thanks for everyone's input. Since I posted...I had a guy take a look and re-diagnose problems I mentioned earlier. First thing...my starting battery was bad. It was not producing enough volts to...

This is an original motor sold with my 1996 Stratos 201xldc boat. (Evinrude Vindicator E200STLEDM). Professional evaluation from Evinrude dealer determined that my fuel leak was coming from the...

I bought it from a marina...they sell Ranger boats. Cost was only 11.87 per 3' by 3' yard. Since I messed up on the lid...I ordered another piece 6' by 3' and they are shipping it to my house for...

Just finished this today. Took the advice of everyone on this forum and it helped a bunch. Hope the pictures help others.

I messed up and only got 21 feet of carpet...mainly because I ordered...

I found some 10" .051 pieces here...we can only use 3 hooks here so I am considering making some with only three baits vs. five and having to cut the hooks out of the jigheads.
...

I couldn't find the stainless wire in 12" pieces on Jannsnetcraft. Can you provide a link to where you found yours?

Ideally you want to secure the base with stainless bolts and nuts...but if you cannot get under the floor, I would go with some heavy duty stainless screws through the fiberglass.

As far as...

I would love to see them. I will do the same. Mine is coming along nicely. Very time consuming I might add though. I cannot imagine doing this in one weekend! I only have the battery...

We were able to walk around in the boat while it remained in this state. We restored my trailer and was able to buff the hull, repair holes, wax the inside and install new sonar units among other...

I posted pics at that link.

My piece is made from aluminum...that is what threw me off. There are a couple of wood shims between the gas tanks and the brackets that you can see in the gas tank pic. I am using 3M spray trim...

I took mine out of the boat and into our local NAPA auto parts dealer so they could cross reference the number on the shock...I was able to get my hands on a replacement within 2 days. Cost was...

http://im1.shutterfly.com/media/47a2dc39b3127cceff315671c63d00000030O00AaNG7ZwzZuGgPbz4U

If you are lucky enough to have a carport strong enough to support the boat...this is how we did it. We...

I had to go to a local marina and order mine there. The rep there said he could no longer get original Stratos carpet...and I settled for Ranger carpet 20oz...tan in color. The marina had a carpet...

I am in the process of starting my recarpeting project and I am not sure what you mean by an extra fiberglass piece. I have a 1996 and do not have any extra fiberglass piece...just the carpeted...