Sorry i have been away from internet! My prop to pad is 2 1/2" i have a 21 pitch mercury vengance prop! When trimmed up to point of it stopping which is 1/4 on trim gauge i am getting 5800 rpm,...
Type: Posts; User: carterjrjimmy
Sorry i have been away from internet! My prop to pad is 2 1/2" i have a 21 pitch mercury vengance prop! When trimmed up to point of it stopping which is 1/4 on trim gauge i am getting 5800 rpm,...
I dont have a jack plate but i am wanting to get one! For now i think i will raise it up a hole!
Oh ok thanks for the info! Is there a way to bypass that bc i could get so much more out of motor! I feel like i should b able to get more than 48 mph out of the 150hp
Wot speed is 48 at 5200 rpm and not sure on prop pitch i got to get out there and look
Well i was told i would get more responces if i posted it on mercury forum so i did!!!!!
I have a nitro z7 with 2012 mercury 4 stroke 150hp. When rpm hit 2000 i cannot raise motor anymore to go a little faster! On trim gauge it is showing 1/4 of the way when it stops! I am running 48mph...
I am running 48 mph at 5000 rpm. The boat i had before would jus go up and let me go faster until i hit the sweet spot but on gauge when it gets to 1/4 its done unless im below 2000 rpm
I jus bought mine! I love it! Only issue i am having is on mercury 4 stroke it wont let me trim up once it gets to 2000 rpm!! I got to figure out if i can bypass something so i can get it to go on up...
I have a 2010 nitro z7 with a 2012 mercury 4 stroke 150hp! the trim works perfect but when it gets over 2000 rpm it will only trim up 1/4 of way then it stops! It will trim back down and go back up...
which is better motor?
which is the better motor?
I am about to buy a used 2010 Z7 with 150hp mercury 4 stroke. Is there any problems or concerns with this model boat that I need to know about before purchasing?
I would like to have a windshield for drivers console on my astro f20. does anybody make one to order that comes already fit for console?
wow that's amazing. thanks for the help i been needing that info bad.
any help would be appreciated
Awesome F20!!!! you wouldn't happen to have the capacity plate in your F20 would you?
do you have anything on the ASTRO F20
Thanks for all the information
ok thanks for the info. This website is very helpful to boat owners
I installed new 20oz marine carpet in my astro F20 about 2 months ago and for carpet and glue it cost me around $350. It took me a half of a day to rip out old carpet and a day to cut new carpet and...
do you have a capacity plate in your F20? If so can you post a picture of it
1994 ASTRO F20 with 200hp Mariner.
i was told that procraft was a very similar boat to mine so if anybody has a 20' procraft with 200hp i would really appreciate a picture of you capacity plate
it needed a lot of work when I bought it. I overhauled it and now it looks really good for a 1994 model! only thing I am missing is the capacity plate for it. I found a place to get one but they need...
I own a Astro F20 and love the boat but finding anything about the boat is almost impossible. Is there anyone familiar with this boat?