Haven’t checked it with a light but it sounds steady, no real big jumps in rpm
Type: Posts; User: Michiganfishing
Haven’t checked it with a light but it sounds steady, no real big jumps in rpm
Stator checked fine during test, and by remove modules you mean the idle and detonation modules? If so I unplugged the bullet connectors going to switch box as well as removed purple wires from...
Ok guys, this one is challenging me. So I have a 200 efi serial number OG750722 that will basically bog during acceleration and won’t Rev over 2k-2500rpm, then sometimes it takes off by itself to...
I’ve got a 1998 Mercury 200 efi serial number OG750722 with a bad fuel pump driver on the ecu 824003A8 and was wondering if anybody had recommendations for a place to have it rebuilt. Thanks in...
Anybody?
Bump
Hey guys looking for this 894 please let me know if you have or know anybody who has one! Thank you
Hey guys! Looking to buy a 966 if anybody has one they’re willing to part with. Thanks in advance!
another thing to check is the fuel pressure resistor, ohm it out make sure it’s in spec, that will give you funky voltage readings on the pump
Take a screw driver or something to cross the main terminal posts. Before doing that I’d check by tapping on the outside lightly, they tend to stick
thanks!
Thank you! Can you explain the 72” to 15” please?god I feel stupid
When all the snow clears up I’ll take a look, thanks for the help! If anybody else has anymore input I’d appreciate it!
Mine goes down the side of the trailer as well, http://www.trailerandtruckparts.com/20-Stainless-Steel-SS-Single-Axle-Hydraulic-Brake-Line-Kit_p_713.html#.Wphep2JOmEc
I was thinking this might...
I’ve seen a few brake line kits, which would be preferred so I know I’m not missing anything, I just am not sure which kit is the right one
Was there part numbers on the lines themselves?, I got all the parts for the caliper’s and And such just need the brake lines, would you recommend the metal ones?
If I remember correctly they’re 3700 lb axles
Disc
The trailer is a tandem axle trailer but only the rear axle has brakes, so I think I would just need a single axle brake kit? If anybody has any brake kit recommendations that would be greatly...
Hey guys my YouTube search hasn’t yeilded any results! If anybody could help me that would be awesome, I just need to know the parts I’d need, guy at ez loader told me to measure so I’m going to...
Thank you, I really just need to know exactly what parts I would need first
ill look and let you know if i find anything
hey guys! i have a 2000 skeeter zx202C, and like the dummy i am, i blew a bearing in the right rear wheel on the trailer, bought a new hub, went to put it on, bad axle, bought a new axle and i...