I couldn’t agree more, because even the option on the PHX for the fully glass dash, it’s still 2 pieces that are screwed together, which is by far the worst design in the industry. So easy to just...
Type: Posts; User: dkeppler1087
I couldn’t agree more, because even the option on the PHX for the fully glass dash, it’s still 2 pieces that are screwed together, which is by far the worst design in the industry. So easy to just...
So I’ve been fishing some rough water lately took the shroud off and decided to just check some bolts/screws. There are 3 screws that are on the right side of the console that I assume tap into the...
it has been stated that if you have an ultrex mega 360 you’ll need a different bracket for the Quest, not sure about target lock. Also I think for livescope users a different mount will be need as...
I have issue with the steering cables that run from the top of the mount to the foot pedal. Wish they could’ve figured out a way to do it like the ghost so they aren’t in the way of my graphs. My...
Thanks guys, I’ll give that a shot next time out.
Last two times out I’ve been having an issue with my livescope Lvs34. It’s cutting off the image at times. The picture posted is a flat, it doesn’t taper up at all. Gonna contact garmin tomorrow....
Running 2 solix 12’s, 2 helix 12’s, mega 360, garmin 126, livescope off the sea clear power harness. All running at the same time over 12 volts all day off a x2 group 31 agm. I had 3 graphs and 360...
not 100% sure but believe it was at the tank or in the tank. It was a 90 degree fitting that had a plastic tube connected to it and the tube had a crack where it was pushed up on the fitting.
Just in case this happens to someone else. My fuel pick up line had a crack in it from the factory. It was sucking air messing up the air to fuel ratio.
Tackle warehouse now has a September date for all 360’s and live lol.
So I have a 2021 920 Elite with the integrated wiring harness currently powering 2 helix 12’s. This off-season I plan on adding 3 more graphs, livescope, and 360 etc. To power all this I’m going to...
I’m all for neat designs and such, but that’s a scam that they are charging $399 for that.
sorry to dig up an old thread but would this work with a 2019 150 pro xs 4 stroke? I’m having trouble getting my bow to lift and it seems like I can’t trim the motor up enough before the trim hits...
For my 2021 920 Elite I paid 81k out the door
atlas jp with guage
merc monitor
2 helix 12’s
ultex with built in mdi
2 8 foot blades
paint over gator
rampage rims
oversized bow step
I would say it’s a repeatedly shaking. I’ll see if I can get a video.
S/n : 3B051199
So the motor currently has 12 hours on it and this issue has been there since day 1. It randomly shakes pretty hard at idle while in gear, doesn’t do it always just sometimes. Runs...
Order it with a SHO instead.
Basspro has some right now
Unless you find something in inventory somewhere you’re most likely looking at longer wait times for every other boat builder. I
Luckily I have one in the family that is ready to drop the hammer on them.
Thankfully I own another boat so I’ve been patient with them, but if they don’t take care of it eventually they will be hearing from my attorney.
.
Speaking as someone who has a cracked rt198p, he is very lucky. I’m getting close to a year now since mine cracked and the boat is now finally on its way to the factory and I don’t even know if it’s...
All about the bottom line with JM type guys.
mine had 95 hours on the motor and was a year and half old at the time. I didn’t baby mine, but it wasn’t abused.