It's quite a bit of a price difference to convert to hydraulic isn't it? I'll pull the switch panel out and see if I can find part numbers. I appreciate your help bud.
Type: Posts; User: JKC191
It's quite a bit of a price difference to convert to hydraulic isn't it? I'll pull the switch panel out and see if I can find part numbers. I appreciate your help bud.
I have a 94 285 pro xl with a johnson 150 fast strike on it. My steering has gotten really hard to turn so I'm looking to replace the cables on it. From what I can see it's a teleflex dual cable...
497178497182497183
It's possible it could be a universal joint that's bad. Does it clunk when ya shift it from drive to reverse or vice versa? Uneven surface and low speed you'd notice it more cause your feathering...
If you have room and a Dremel with a cutting wheel you can cut a groove across the domed head of the bolt and use a flat head screwdriver to keep it from spinning.
Above post is spot on. Blue wire can also be used as the signal wire to turn on a powered antenna if your using one. Yellow is suppose to go to a switched 12v power supply so your radio will be...
Yep. On 127 just north of St. John's. We got them down along US 12 between Hillsdale and Coldwater now too. Huge eye sore not to mention how much they jammed traffic up when they were moving all...
I have a 24p raker on my 285pro xl 150 fast strike and I can only get about 56 mph at 5500 rpm so I can't see getting another 24mph with only another 1500 rpm.
From what I've read on ChampioNman's posts 5800 is about the max that ya wanna run a 150 faststrike at so I'm guessing a 175 intruder would be roughly redlined around the same rpm.
I second the Diablo tuner. I have one on my 2009 impala ss with the 5.3 and also got Diablew to do a custom tune on it.
I had number 4cyl afm lifter take a crap on my 5.3. I ordered my new one off of rock auto. If I were you I'd order a new lifter guide as well for it because they're plastic and they wear and...
I've heard good things about the range disabler
When I took my concealed carry class the NRA instructor told me that your first shot should be from your side as soon as your pistol is pulled from the holster and pointed in the direct of the target...
I usually just take a few of my ice packs I have for my work lunch and put in the cooler on my 285 pro xl when I'm heading out fishing and they still have solid ice in them at the end of the day.
The best thing I've found to do with stripped out screws in fiberglass is to drill it out just enough to fit a cheap plastic drywall anchor into and then screw your screw back into that. I've done it...
To me it sounds as though they are running the trolling motor in 12v with basically twice as much run time. I'm pretty sure that the batteries would have to be linked together themselves to get...
I know I have a 94 285 pro xl and the first fuel fill is closet to the front fills the port tank and the fuel fill closet to the transom fills the starboard tank. I'd have to check my valve when I...
I got one of the Boss stereos with Bluetooth and USB in my bassboat hooked to two Sony 6.5" speakers that I hook my phone to while I'm fishing and it sounds great. Even loud enough for me to hear it...
The Fortune lake chain in crystal falls Michigan is the most beautiful lakes I've fished. I could see the bottom plain as day in 25 feet of water.
Yeah it's a mesh type fabric holding it together. Maybe it's a discontinued lure. I'll check out bass pro and see what they have available now. I appreciate yalls help.
I have this lure and it's taken a beating over the years and it's coming apart and I'd love to find out who makes it so I can replace it. Any help would be appreciated. 489622
Looks to me like when it was forged it was lacking a little material so when it was ran in the lathe it left some of the spindle with non clean up. I'd say as long as the non cleanup doesn't...
I've worked for both a John deere/exmark dealer as well as a gravely/cube cadet dealer and from my experience both exmark and gravely are top notch zero turns especially if your looking at getting a...
The maple sugar is really good. Kinda reminds me a lot of a light brown sugar but more of a powder consistency to it
Yeah my cousin has a burner set up that runs off of wood. It’s about 8 feet long and 4 feet wide and he has a stainless steel tray on top of it that has 2 dividers in it with the bottom 2 inches of...