Red , Im doing the same thing to an X 19 . I went with Alexseal paint for the finish coat but check out Jamestown Distributors for all the primer and their line of products . The Totalboat line is...
Type: Posts; User: 308shootr
Red , Im doing the same thing to an X 19 . I went with Alexseal paint for the finish coat but check out Jamestown Distributors for all the primer and their line of products . The Totalboat line is...
Another thing to consider , I'm restoring an X-19 that had carpet . After I removed the old carpet ,I found 18 holes in the bottom of the boat where Xpress had injected flotation foam in the floor...
I changed mine out , It is a pain to get everything to lay down just right . I ordered mine through SIM yamaha parts . (SHIP ISLAND MARINE) in Michigan . They have all the schematics for every yamaha...
If I get a chance ,I'll give him a call tomorrow. Thanks
Anyone ever repaint any Xpress boat . Like sand,prime and paint ? If so what did you use ?
i had the same boat and engine , 2014 model . I would think the Bravo prop would be a real winner on that hull.
Thanks. , I didn’t even think of doing that .
Would anyone know where I might find a few cans of paint to touch up a 2007 X19 . The color appears to be charcoal gray . I’m not sure what it was called since I didn’t buy it new .
Has anyone here gone from carpet in their boats to the awlgrip paint ? I'm wanting to make the swap and I'm concerned about the lid gap when I remove the carpet . What did you do to close the gap ?
I had planned on ripping out the carpet and spraying awl grip , new seats , repainting the hull , and sea dek .
Ok fellas ,I needs some opinions . I currently own 2 boats , a 94 bullet with a 250 pro xs and a 06 X19 with a 150 vmax . How much market do you guys think there would be for an X19 if I decided to...
After looking at the boat again I believe I'm gonna do a complete repaint .
I'm looking at a used X-19 , it does have a few scuff marks from fishing and years of use . My question is has anyone tried to buff the paint with a compound and wax or is a re-paint my only option?
I have a 2007 250 pro xs with a sportmaster lower s/ n 18519468 . My question is , I asked my local dealer how much fluid a sport master lower should take to be full but not overfilled . They said...
I also changed all of my pumps while I was in there , it had rather large bilge pump so I went back with an 1100 gpm bilge . I put the 800 gem fill and a 500 gem circ pump
I just pulled my tank on my 20 xd this weekend . It helps to pull it in the shade , any heat input to it like sunshine will make the tanks swell . I also pulled a vacuum on mine with a hand siphon...
Motor was put on by Paul Nichols in Soddy Daisy.i think it was only run with light loads .Paul did say that the trophy plus are really stiff .I would like to try a Bravo 1 in 27 or 26 pitch. I’m not...
That's just it , it's not spooling up at all . Can a prop be a higher pitch than indicated ? It's not ventilating at all . I didn't notice the rpms . I may go today and try it alone . Should I go to...
I have it on a 20 xd bullet . It also has a sporty gear case with 1.62 gears . I probably have 50 lbs tackle a full gas tank , my son @170 lbs and myself @ 285 . The previous owner only ran the boat...
Thanks for the replys , I did not know about the revving in idle . After talking with the previous owner I think I may be turning too big of a prop . I'm gonna try a 25 or 26 pitch instead of my 27...
2007 250 pro xs # 1B519468. New to me optimax , put the boat in the water ,fired right up , idled for about 10 minutes . Got past the no wake zone sign opened up throttle and boat would not get on...
I like 10 lb P- line c x premium
Nice ,Rail Dawg,l have to get some photos of mine at the lake when we go next week.
I love the hydro just need a water pressure gauge and another prop besides that p.o.s. Power tech .to realize the full potential
I've had three minn kotas on 3 diff boats . All have been flawless in operation.