Thanks guys I will give it a try.
Type: Posts; User: STLBassBuster
Thanks guys I will give it a try.
Thanks for the information. So you think #36 or #38 on this schematic? I would probably replace both, O ring, and seals while I am into it.
https://i.postimg.cc/pyrtR6TM/OX66LUS.png
Intermittent noise coming from my OX66 225 VMAX. Kinda reminds me of belt squeal on a car. It will do it sometimes in gear or at idle. I took a video of the noise and about the last 3-4 seconds it...
Pm sent
What condition is the prop in?
Yep you will need to drop down in pitch. I would see if you can borrow a 24P 4 blade or a 25P 3 blade to start.
Call C&O marine in White Bluff TN. and talk to their parts department. They will have the fasteners you are looking for.
You can try etrailer.com or C&O marine after you take some good measurements of your stock fenders. I have a 1999 203 sitting on the original tandem axle trailer, would love to put stainless fenders...
Your 4-stroke SHO has a different power band compared to your old 2 stroke HPDI. You will need to tinker with some different props & the jack plate height until you find its happy place. I ran 25...
Can't hurt to investigate the age of the battery, if it's not that old charge it up and see if that makes a difference.
Jerry you got her looking sharp! The Llebroc's are a nice touch.
I agree, that's a good price.
Yes this unit is compatible with the Mega 360 transducer.
you will probably lose 1-2mph on the big end.
I have a 1999 203 with a 98 225 OX66 VMax. Is your 02 sensor clean? No leaking lift pumps? I switched from a tempest 3 blade to a fury 4 blade. I lost a couple mph on the top end but I really like...
I will take the ark rod.
I have an ultrex and have the Comfort troll deluxe tray. Do have anything flush mounter on the bow you can remove to see whats under the front deck? Champion used a pvc or conduit to run wires...
The Yamaha M series is also a killer 3 blade for our champions, it will get you better bow lift than a tempest.
The Yamaha M series is another really good prop for our champions and will lift better than a tempest. Personally, I like a 4 blade for the best hole shot and rough water handling and run a Fury 4...
You have a lot of sentimental value there. It's a tough call indeed. If you decide to keep it, run it a couple times a year to keep it fresh. I would not put baby in the corner for 10 years lol.
That is correct.
My 1996 catalog shows 48 gallons (main) and 6 gallons (aux) for the 194 Fish Hunter.
I’ve seen it on the top cap when the boat has sat out in the elements for a long time. Environments in the southern states can bake em!
Congratulations on the purchase! I know the 3.1L OX66 really well (I own a 225). Make sure you clean the 02 sensor, and the port that is behind it. Their are lot's of youtube video's on it. It does...
I would be more concerned of any bigger stress cracks than crazing, especially near the back corners and transom area. Inspect those areas thoroughly.