Navionics as chart-source is available even with no card. Your issue is typically related to a dying ethernetcable, but test the card in the other unit as well.
Type: Posts; User: Team Colibri
Navionics as chart-source is available even with no card. Your issue is typically related to a dying ethernetcable, but test the card in the other unit as well.
Reefmaster is not compatible with anything that has an Apple on it.
Reefmaster is fairly cheap, and so much better than the alternatives, that I see no reason to even look at alternatives.
Save waypoints, do a hard reset.
Minimum size is 3A, actual size is given by the wiring you use. In short, 3A or more.
1. I prefer SS3D over all other alternatives.
2. Yes, just ensure the Gen 3 is fully updated and it will network will with newer units.
Thanks rob!
What are the issues? (I don`t have a 150 anymore, I sold it when I bought my 185HW.)
Assuming that you mean AI 3i1, and that the transducer is connected to the correct port (channel 2, called «structure» at the back of the unit), the transducer should be automatically recognized. Go...
If you swap places for the units, your Carbon is compatible with AI, the Gen 3 is not.
Why not just export them from Reefmaster?
Restore sonar-defaults and set it up again.
Yes. Even to non-Lowrance units, as most of the NMEA-sentences used are generic.
1. Test with another (know good) transducer.
2. Save waypoints and do a hard reset.
It is on 9 vs 9, so I would expect it to be on 7 vs 7 as well.
Lowrance units showing incorrect suply-voltage is by no means normal, issues in electrical systems causing voltage drop is VERY normal. As long as your units have updated software, you can safely...
You should never assume that anything not mounted by you is mounted like it should. :) Especially when it comes to headingsensors (like your P1) and transducers, as mounting this perfectly requires...
Your SS 3D module connects to your unit with ethernet, the yellow-ish connector on your unit. I have no idea what you mean by power wire to the structure inlet, you should not have anything...
As Gen 3 can only handle one 2D-transducer, I’m going to guess that your TotalScan is really an LSS-2. :) If it is not, you can simply use the 2D from your TotalScan by selecting m/h TotalScan as...
Minor updates will never be available through WIFI, only the major ones.
Some updates require a large update-file, those will not load over WIFI unless you have a memorycard in the unit for storing...
I have VV Link in combination with various units, but I have never looked for water-pressure. I`ll check the next time I`m on the water.
A screenshot or three would be a good idea here. :)
Is "Guide Trail Chips" a map or a bunch of trails you have imported to your unit?
Is it your position or your heading you find incorrect?
...
Check the module and see if it has power and that the yellow wire is connected as it should.
Assuming that your AT is the first generation, make sure the module and your unit is running the latest...
Yes it will.
The lines are probably ringing from your jackplate.
