Search:

More carbon buildup too.

Check that little plastic T in the fuel line. Mine was cracked and sucked air. Caused similar issues.

You buy the whole clear part. Last time I did it was about 8 bucks I think.

http://xs-s.com/zf/images/smile/emthup.gif http://xs-s.com/zf/images/smile/emthup.gif

Because we can.

and maybe you have a bigger [edit] Than us faster (envious) guys. http://www.bassboatcentral.com/smileys/wink.gif

There was a recall on the 2000 only 19SS that were determined to be bad actorsBecause my buddie borrowed one of my tin boats while his was in Murfreesboro. Damn thing would hook like hell before the...

Nice http://xs-s.com/zf/images/smile/emthup.gif

That is the speedometer intake, mine has been plugged for some time.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">I would get another brand of battery, never had much...

Check to see that the plastic "T" that goes from the oil pump to the fuel line is not cracked. Also check that the return line from the airbox is attached and not clogged.

Check the plastic "T" that comes from the oil pump to the fuel line. Mine was cracked at the junction of the 1/8th line and only leaked a little oil, but would not keep a hard bulb or allow long...

I was told by an old man years ago that all spinning reels suck and I should throw them away. I haven't had a line twist issue since. http://www.bassboatcentral.com/smileys/wink.gif J/K...

XD-50 is the old RAM OIL, and does have Carb-X in it. I run the XD-50 but I use about half the recommended Carbon Guard.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RUSTY63 &raquo;</TD></TR><TR><TD CLASS="quote">

I did find out that a 3:00 in the morning security...

the 19s were recalled too. http://www.bassboatcentral.com/smileys/wink.gif

http://www.boatersworld.com/we...10051

http://www.hitchcorner.com/locks.htm

Some were reaching 80 ish with the 225HO and a 28 Mazco

8 inches is the ticket http://xs-s.com/zf/images/smile/emthup.gif

Most of the 22SS/225 Rudes I have seen run about 66-67 with a 25 gade. You might need to raise the engine up.

See if this works, takes awhile to load.
http://www.ufpnet.com/movies/UFP_A-60-ReClip.mpg
http://www.bassboatcentral.com/smileys/praying.gif

Might look here instead
http://www.ufpnet.com/
...

Most leaks are around the livewell intakes at the hull or from the livewell hoses leaking into the boat.

You better check out the warranty, I think Genmar decided no warranty on boats older than 2000 and only 5 years on newer non-Genmar hulls. I may be wrong....

Yes! http://xs-s.com/zf/images/smile/emthup.gif

I always have my Costas strapped on. I tighten them up when I start the big motor, and loosen them all the way while fishing.

Probably because it is over 70X70 in dimension.