Sounds like you need a new water impeller. The fins are are worn and not moving enough water to create enough water pressure at idle causing it to warm up. Soon as you take off the impeller spins...
Type: Posts; User: 920Bassin
Sounds like you need a new water impeller. The fins are are worn and not moving enough water to create enough water pressure at idle causing it to warm up. Soon as you take off the impeller spins...
Use your mapping on your unit. If you're using Lakemaster use the shallow water highlight, if Navionics you should know what's shallow and what deep by the contours and color. Slow down when coming...
Is it the angle of the picture or 1 of your blades leans back more than the other?
What's the price to get all 4 bunks covered?
The dealer I bought mine from has a power wire for a single unit up front on a block. Now with 2 units and 360, I made sure all 3 has a inline fuses and connected those 3 to the single power wire b4...
ATF? Automatic Transmission Fluid? If so, any or particular brand?
When do u know to add more fluid? I do see the fill hole by the windshield on the console. Obviously there isn't a min/max reservoir to fill unless i'm not seeing it. Also what fluid do I fill it...
That may be the reason, I notice a lost of bout 5mph on my 920Pro last fall. I installed a new ducer and notice about at least a minimum gallon of water that was slowly leaking out of screw hole in a...
How much did Tim from Phoenix quote you one for?
Do Navionics mapping cards work in Garmin units? If not how are the contours compare to Navionics?
Any of you guys upgrading to dual units and have a single unit dash mount, BBT or Precision for sale?
You have a picture of this set up?
I have pretty much identical set up except mine is a 920Pro. I run a 25 fury no plugs. Tournament loaded with full live wells it's still ok. Could be better but it seems to be ok with no plugs. Try...
I only have this issue when unloading on a steep CHEAP made ramps. The nice steady ramps should drop when unloading unless you're backing too fast and going in too deep at the same time.
I have a 6ft on mine and it start literally right below the bottom wing. I notice after installing I did loose top end speed. My 18 pro XS seems to run fine and RPM seems like it went from 6k rpm to...
Guys that have a keelguard/shield installed on their bird 920 specifically, you guys notice a lost in speed top end? What length and where did you start your keel protector?
Hey guys!! Fun fishing I usually cruise at 50-60mph. Anyways, I have a 2018 920 with 18 Pro XS, 10inch Atlas running turning 25 Fury. In the spring i was getting 74-77 mph at about 6k rpms via GPS....
i have 18 920 with 18 Pro XS, 10inch Atlas w/ swing tongue in my 24 ft garage. I got like inches left to the door. You should be fine!!
Nice bird!! That's my next color combo for a bird...
Mine sometime is dry and sometimes it get wet. What i do is stuff in that compartment that i dont want to get wet i put them in waterproof bags problem solved. Stuff in that center compartment i dont...
On auto recirculate. How often does it recirculate? Or i should say the time intervals?
Water temps in the bays are around 47 to 50 way in the back of the bays. Fish are still in staging areas. You'll get small males cruising the flats only right now.
Im in for a regular old style troll tamer
Good luck, im trying this new this year. I did put some blue lock tite on it so CROSS FINGERS, good luck to all whose doing it also..
Here what i did to my 18 920ProXP, i cut my bounce buster (aluminum) then i drilled it and tapped it with the same pitch as troll tamer. Had my TM come loose last year on the great lakes here last...