I have used some of the vinyl glue with success before. Use the type that literally melts the vinyl together not the plastic goop that you have to heat.
Type: Posts; User: jglenn
I have used some of the vinyl glue with success before. Use the type that literally melts the vinyl together not the plastic goop that you have to heat.
here you go for pre formed split grips
http://www.swamplandtackle.com...AFOAM
these are great guys to deal with also
The new Threadmaster light is really nice. Prefer it to the original
nothing I've seen is clearer
get um quick because these are the last of the US build All star blanks. Everything is moving overseas for them.
the taper is fairly easy to obtain by simply elevating the tip when you are turning the rod during drying. You just add some extra expoxy in the arera http://www.bassboatcentral.com/smileys/smile.gif
excellent blanks
they do produce "unique" blanks for several rod companies but... no one is talking
yep the Wagners are excellent pads with very low dust
nothing wrong with Wheel weights at all. Used them to make lead bullets for years. with a bottom flow furnice
Trick is to use a flux and remix the lead,tin and atimony together that's in wheel...
if you really want something better than PB then go find some Kroil. By far the best out there.
let it soak overnight with Kroil then tighten up you puller and wack the end with a leather or...
try the Aqua strip product
http://www.ibacktonature.com/Pages/marine.html
not perfect but it will help you remove your auto clear coat without damaging the Gel
I'd look at some of the St. Croix kits Mudhole carries
good kits and a good blank.
Threadmaster Lite has just hit the market if you want/need a thinner version
try mudhole tackle. they sell some fairly cheap no name blanks that are great to play with
after you get comforable with your skills try the excellent Batson line of blanks. The forecast line is...
personally I wouldn't get anything but an OCM/Bbomb power pack
if memory servers me right they simply changed the heads
I have an original 91 150 and she willl scream
I'd ask the eBayer the exact part # then cross ref back to your engine on the Bomb parts site
that is a faststrike/Intruder PP
water in any cylinder is easy to spot form the plugs. The offending cylinder's plug will look like it was sand blasted CLEAN
Boy do I have to agree with that statement. Best board on the web. Have a friend who had an old Merc so I looked over on their forum on an issue he had.
Jessss are we lucky here to have some...
only issue with that one is I think it's a 36" shaft verses the 42s they also made. if it will work then go for it
in general they are great little trolling motors.
Not sure what lbs that model is but it's at least 45 I'd think. The model # is most likely BF4S . these were made in the mid 90s and it's 24volts...
get a cheap air stapler from harbor freight
we used one to replace the skins on our 362 and it worked fine on the glass form.
if you don't have an air compressor find a friend who does....
titebond III is the way to go as Rush said
II works ok but III is really ewasy to work with and dries quickly
http://www.tackleunderground.c...=foil
http://www.rivercitylures.50me...e.htm
usually called a check valve I believe
#392988