Don
The tubing worked great. The grey tubing is much more flexible and tough.
Thanks for the help. You and your staff.
Don
Type: Posts; User: Cajunhunter67
Don
The tubing worked great. The grey tubing is much more flexible and tough.
Thanks for the help. You and your staff.
Don
Thanks BCB.
Parts ordered from Don at European Marine.
Don
Done! Rhonda was a huge help in this. Thank you.
Thank you Don. I know you are very busy.
Don
Don
Where can I buy the grey tubing and fitting?
I sent Rhonda and email and message but haven’t heard back?
Thanks
Don
This post can be deleted. Called BCB. It’s a Mercury part.
Don
I am needing to replace the water pressure tubing from the gauge to the engine.
This includes the B-Nut at the gauge and the Union at the engine.
I currently have an email to Don at European...
Digital would be the way to go, but also a lot of money versus what I need right now.
Appreciate it.
Don
Found multiple cracks in the line. Maybe water during the freeze?
Have to replace from gauge back.
Email sent to parts dept to order parts.
Don
Right now it looks to be up inside the aft gunnel area.
I will see if I can pull it rearward to access the leak.
If I can, then I will be able to install a Union.
Thank you.
Don
2016 Merc Pro Xs
S/N: 2B122037
Water pressure gauge quit working. Chased it down to a chafe leak in the bilge area. I cant put my hands on it so I figure I will need to run new tubing.
Its on a...
Clean the old paint and rust off the supports.
Use any type of gel rust killer on them.
Prime and use a good Rustoleum paint.
I used the can type with a paint brush. Multiple coats. It doesn’t...
With the new Puma, Caracal and Jag STS hulls being the latest and greatest, it will at least 4 years before one is available in your price range.
It may not have the soft ride of the above...
With clear lids in Louisiana during the summer, I would throw seasoning in the livewell's. They are going to cook!!!:laugh:
Don
Thank you!
Its time for seal replacement. Cylinder at engine leaking oil out the port side.
Anyone know what seal kit is needed? I'm at work and cant put my hands on the unit.
Seems the the HS5167 covers...
I clicked steering and gave up!:doh:
Thanks BCB
Has the latest model steering wheel been removed from the Bass Cat Store?
I remember seeing it at one time. Was thinking of updating my 2016 steering wheel with the latest offering.
Don
The 17-18 foot sector has been gobbled up by the Aluminum boat industry and Nitro.
Probably lows glass sales and a flooded competitive market killed the Sabre.
Currently with the PII and the...
I removed the cover from the bottom of the pedal.
After checking everything out, it looked normal.
Leaving the friction as it has been was a no go for me. Much to easy.
I removed the friction...
I lowered it some more. About a 1/4 inch.
My bow lift is now what it used to be. In fact it was easier to drive at the upper speeds.
Left wheel torque is back to its normal feeing.
Once thing I...
Thanks for the info.
I will be removing my the pedal and gaining access to the friction plate.
Will update once I get this done.
Don
Gerard
See post No.8 and No.10.
I plan on lowering it a bit more when I get back from work.
I’m about 1/2 in below flush on the JP.
Don
Will do. Will drop her a bit more.
Running the 25 Trophy Plus has always ran right at 71-72.
Fury 24 was faster. Like the bow lift and handling of the Trophy.
Don
So far really enjoying the Force.
However, with the pedal adjusted to max friction, it could use a little more.
Sometimes when removing my foot from the pedal, I will bump it and cause the head to...