Search:

I’ll try that. Thanks

I have Garmin Echomap Ultras 126SV and 102SV ethernetted to each other. I had Lowrance HDS Gen 3 graphs previously, and after changing to the Garmins, I left the point 1 installed on boat, and...

Recently I get this message every time I pull trolling motor up to run to another spot. I have a Minn Kota Ultrex trolling motor with the adapter to work with my Garmin Echomap Ultra 122sv and 102sv...

On my 2016 Phoenix 920, the carpet around the top edge of the trolling motor foot pedal recess is coming loose. What glue do I need to glue it back? Thanks, Jim

502673

Does anyone know where I can get some of these clamps? They come in different colors. The clamp is 2 half pieces, that you put around the shaft, and there is a short screw for each half...

I checked all the connections, and found some of the nuts that secure them weren’t screwed all the way down. Hope that fixes the problem!

I have the 126sv and 102sv ethernetted together. While running boat across the water, and not really bad rough waves, the units will occasionally shut down and reboot on their own. Total power isn’t...

What’s the best way to clean bass boat carpet and what to use to do it? Mine hasn’t been cleaned in a while, and needs cleaning. Thanks

Are you saying the ethernet cable is bad?

My 9” bow unit, which is ethernetted to my 12” console graph shows blank dark screen when using structure scan. Structure scan works great on 12” console graph.

I downloaded my hds 9” and 12” gen 3’s to 7.0 and did hard reset. My 9” on the bow works great, as it did even when I had the 18.2 version. The problem is still on the 12” in console, with total scan...

1. After doing an update, and before doing a hard reset, how do you save waypoints, trails to an sd card?
2. After saving waypoints and trails to an sd card, how do you do a hard reset?

As to your response to the 1st part of my last question, after doing a hard reset, you said it will wipe out all user settings. Are you saying that whatever the settings are, if they have changed,...

It’s been several months since I updated my 12” unit, and I don’t remember if I did a hard reset after updating it. Both my 9” and 12” units are updated to v18.2 with last digits 142. When I do a...

I’m having same issue with my hds gen 3 12” in console. I also have an hds gen 3 9” on the bow. Both have been upgraded to latest 18.2 version and are ethernetted together. The bow unit works fine,...

Hope this makes a difference!

Thanks for the info. The weather stripping tape sounds like a good idea.

A little in the big tackle storage box on the left side of it and the little trays on the step up part to left of ice chest, under passenger console. With my boat in my driveway, it was on a down...

I just cleaned carpet on front deck of my 2016 920, and after rinsing with water hose, I found water inside some of the boxes. I thought the channels around the edge, under the cover would keep water...

My boat/motor is a 2016

That's 1 person, 2-8ft power poles,1/2-3/4 tank of gas, livewells empty

I am running a Fury 3 25 pitch currently and am considering getting a 26 pitch. With the 25, I am getting speeds between 78.1 and 78.5 mph with rpms from 5990 to 6040 depending on where I have my...

JP920PROXP;Boat/motor 2016 920 pro with Mercury 250 Pro XS; Fury 3 blade 25 pitch; Springtime 1/2 to 3/4 tank of gas livewells empty; 79.6 mph @ 5930 rpm gps; (2) 8' power pole blades; Atlas hyd....