Price lowered.
Type: Posts; User: adepinet
Price lowered.
For sale a Suzuki 15 1/2” x 17p right hand rotation 3 blade prop. Prop is in new condition. It was a spare for my boat. Located in Morral, Ohio 43337. Pm me and I’ll get you pictures. $300, $350...
Thanks, I’ll see what I can do
Hello, I will be taking delivery on a CPO Mercury 150hp 4 stroke. I read that a water/fuel separator is recommended. The motor is going to be mounted on a Ranger 690vs and there really isn’t space to...
Thanks for the help.
But if I wasn’t worried about that I could just use the transducer I got because it can do both?
Soooo... Would I plug the thru Hull transducer direct time the 1199ci? I ask because I have 2 transducer connections already coming out of the unit. 1 for side imaging 1 for dual beam. I probably...
I didn’t think either but never ran into that situation before. Thanks
Hello, I purchased a 1199 ci hd Fishfinder with a XPTH 9 HDSI 180T Thru Hull transducer. My boat is a Ranger R82. I had pictured in my brain that the first step above the pad is where I would drill...
So I pulls the spark plugs after I ran the boat all weekend and the #2 sparkplug, which was replaced after the rebuild, looked brand new still. It wasn't completely dry but not near as wet as the...
Just an update. Moved the timing around and didn’t seem to make up the lost rpms. I’m not sure what’s going on. Seems to me that I have a fuel or a compression issue since I can’t get over 5k rpms...
Idle stabilizer is still in place. What is the recommendations for timing to be set at?
Timing is currently set at 16 degrees. Idle timing was at 4. I will look to see if the module is still installed. Thanks
But I guess my question is, is the timing off 6 degrees? The nameplate on the ecu says wot timing 16 degrees. The manual says 16 degrees. That’s my confusion. Maybe I’m overthinking this whole thing....
The builder said he backed off the timing so I wouldn’t run it to hard during the first couple hours. I think he was worried since this wasn’t a new powerhead it was a used powerhead that came off a...
Sorry, serial# 0G644227
model- 1-150413U
Year- 1998
WOT before rebuild 5800 rpms
WOT after rebuild 5200 rpms
23p trophy prop
I realized I probably posted this in the incorrect thread:
Hello, I’m having trouble understanding what the timing of my 150efi is supposed to be set at. The sticker on the side of the ecu say 16...
I have 10 hours on the rebuilt motor with the timing retarded from the builder. He retarded it 6 degrees he said. Setting the timing at 21, is that at wot? Or cranking and checking it? Thanks for the...
Hello, I’m having trouble understanding what the timing of my 150efi is supposed to be set at. The sticker on the side of the ecu say 16 degrees but reading other posts they say 23 degrees. Could...
If anybody has this boat and is willing to share the prop to pad height that would be great. I am running a Yamaha 250sho with a 4” hyd jackplate. I feel like I’m too low at 5”. Thanks Aaron