Search:

I have a 2002 zx250 with a 2004 3.1 OX66 250 phase II. I put it on the water today for the first time.
Jackplate 3" below pad 4 blade 24p power tech prop. 5800rpm about 3/4 trim 20 psi water...

Are they good props? I’m thinking about trying a 4 blade 23 pitch. My boat ran better with a friends PowerTech 4 blade than with the tempest

I’m looking for a prop and found Turning Point. I’ve never heard of them. Anyone have experience with them?
I’ve been running a Tempest plus 26. Tried a friends 4 blade PowerTech 23 and my boat...

Sent message

Could I get a 80 hook package? 30 #4s, 30 #2s and 20 #1s?

Thanks guys

What’s the best safest thing to clean the screens with?

I am looking into getting some helix mega units. I read that the mega live will work on g3n and g4n is that right?
Will mega 360 and or mega live work on a mega di or does it have to be mega si?

Can someone tell me the difference in the 3.1 OX66 200 and 225?
all parts look to be the same. Block, piston, heads, CDI, all Same part number between the two.
I cant find what the difference is.

Nobody?

I put an sd card in the unit and downloaded the update. It says update will be installed when unit is restarted. I have restarted it several times and it still says update available and will be...

I am looking into getting new or new to me electronics. What units support active immaging x-ducer and what’s the difference between 2in1 and 3in1 ? Both have active immaging?

https://imagizer.imageshack.com/v2/150x100q90/922/ukeAUR.png

I have a minn Kota 36v 101 thrust foot control 52” shaft I think. Great shape asking $400
3375801569

Tried this and same problem. I will try replacing the sd card adapter now.

No sir. Nothing else

I have a lakemaster card that is a little over a year old and it’s giving me trouble. It started out getting slow to load the maps. When I am running on plane it started having trouble keeping up...

I have a Johnson gt150 the prop on it says raker 26p. It runs great with this prop but I thought that would be too much prop for that motor. Is it possible that the prop was pitched down or should...

I am trying to install a water pressure gauge. Where do I put the fitting for the hose for the water pressure gauge?

The motor started bad. I’ve done a little trouble shooting and found no fire on # 1 cylinder. Any ideas what would cause this. It looks like 1 and 4 have the same coil and 2&3 have the same.

Where can I find parts? I need a front plate for my 997. It is broken and I’m worried about water getting in it

I have a friend with Lowrance units. On his side scan and down scan the fish are highlighted red. I have trouble seeing or distinguishing fish on si/di on my humminbird units. Is there a setting that...

I cut the wire on my SI transducer. Can a transducer wire be repaired? If so who repairs them?

When I change setting on my 1198c like course up instead of north up or depth colors it goes back when I power off and back on. How do I get it to stay?

I have two 1198 units and my transducer at the bow isn’t showing depth. When I try to use the other transducer I don’t have the sonar option under network source set up. Any ideas?