Nope that’s a salt issue, as stated baits can be a source and once it starts it continually comes back. I’ve also seen reels left on the deck and driven to or from fishing on wet roads that the State...
Type: Posts; User: reelex
Nope that’s a salt issue, as stated baits can be a source and once it starts it continually comes back. I’ve also seen reels left on the deck and driven to or from fishing on wet roads that the State...
Depends on the model and generation…..
Please define “repair”…
Well, I was involved to a degree in the development and testing of those rods and when mine began to give up the ghost the only thing “for me” that produced the same sensitivity, detection, and hook...
Tranx200 or Bantam but for maximum torque (power) 6:1 gear ratio
Bantam is actually far more bulletproof than Metanium. It’s really not even close when it comes to stability in the frame and side plates. Dan
Worn clutch assembly. No parts available. Dan
Not if you kept playing with the cast control knob and I’m sure you’re very proficient with the bait caster however, DC reels are different. It’s not an under lube issue. It’s not an over lube issue....
The biggest issue with the sea reels is that they are not adjusted like a standard bait caster, and most people don’t take the time to read the instructions how to properly adjust them. For one you...
NO, you have one with a bad clutch plate. There was a running change which corrected this. The clutch plate has to be changed out to the new version or it will continue. Dan
The gear ratios for in USDM CQ are not ideal, and the lighter walled spools can spread under load. Dan
If you’re considering those baits you best go with the 300 Tranx without a doubt….Dan
It definitely sounds like a bearing issue and or overlubricant…do you know we’re the new bearings “dry bearings” or did they come lubricated. I suspect they may be “greased” bearings? I would pull...
There are four bearings that need inspected. Your issue most likely is the spool shaft bearing and or the pinion bearing depending on which ones you changed, I assume one under tension cap and one in...
Over lubrication
Dream on!
CuradoM….have never liked the current Chronarch offerings. Dan
100B is unique to itself 200 and 200BSF are same, 200E is unique to itself. Dan
ARs should never be lubed…ever. A lot of manufactures overload the inside of the real, not lubrication find its way into the into reverse there in causing the same issue. I’ll stand taper versus our...
Tranx 200
JDM gear ratios, handles, and spools can vary from Model to Model vs. US offerings. Shimano US will now service but you’re looking at 6-10 weeks if they have to order parts from Japan. Dan
you have four white paddles on the spool two should be flopping two should be fixed in place the ones flopping should be opposed to each other. Turn your spool tension knob to where you have a 16th...
Turnaround time, age of the reel(s), customization wants. Dan
Here’s a tip if you own a Shimano reel. Ask whomever your checking out which lubricants they use particularly grease. If they are NOT using Shimano greases then look elsewhere as they are NOT all...
Simply put NO such thing…..
