Well I tried to remove all three plugs identified in the photo. These things are extremely tight. I stripped the head in one of the allen heads. Not sure what to do now. I wonder if they were...
Type: Posts; User: Sharecropper
Well I tried to remove all three plugs identified in the photo. These things are extremely tight. I stripped the head in one of the allen heads. Not sure what to do now. I wonder if they were...
Yeah I thought the same. remove the plug and see what's behind it.
Yeah I was considering running separate sensors. Any thoughts on where to install them? I've located these plugs in the photo's, but not sure if they access the crankcase or a water jacket.
Hey Guy's,
It was suggested I post this question here on the Suzuki forum. I have a 2005 Johnson (J115PL4SO) 4 stroke engine. I purchased a Faria multi-gauge setup with oil pressure and water...
Wish I could get more input on this. Can anyone tell me what these indicated plugs access? Crankcase, Water Jacket? Any help is appreciated. Thanks
Can anyone tell me if any of these block ports in the photo's are suitable to install a water temp sender? 414295414296
Separate sensor. Is this required for both the water temp and oil pressure?
Hey Guy's,
I have a 2005 Johnson (J115PL4SO) 4 stroke engine. I purchased a Faria multi-gauge setup with oil pressure and water temperature. My question: Can I splice into the cylinder temp wire...
Timing belt and valve adjustment. OK, Thanks. Recommendations on where to buy the parts online? What about how to videos on belt replacement?
I was told the engine has about 500 hours on it. I will replace all of the fuel filters and change the engine oil. I have already replaced the water pump. Any other maintenance suggestions? I...
For those of you that have this motor I would like to get your opinions of it. I just recently bought this one second hand. I want to repower my Ranger 680c with it. I've never own a four stroke...
2004 Model: J90PL4SO Hard to start then runs badly. I would like info on how to self-diagnose the problem. I have read in my Johnson service manual that there is a process for self diagnosing...
I have a Johnson J90PL4SO 4 stroke efi. I have cleaned the fuel vapor separator, cleaned and check the high pressure fuel pump, cleaned the fuel rail and all injectors, changed both fuel filters, ...
Update- Was able to take the boat out on the lake today. Engine ran like a champ; not a single sputter, misfire or die out all day. Cranked right up every time. Shifting was not an issue;...
Had a little time to work on the outboard today. One thing I did find is the timing advance was stuck about an 1 1/4" forward or advanced. Not sure if this had any effect on the problem or not. ...
Gear case oil was changed recently; maybe three week prior. I'm actually going trough the break-in process. I current have about 5 hours on the new power head. It's been running great until...
I'm having issues with the engine dying out when I shift from neutral to forward. Engine will start and idle but will die went shifting. Any thoughts? :mug:
Yes sir, I did not put new kits in the carburetors (all 4) because they appeared to have been recently rebuild by the previous owner or some repair shop. All of the gaskets appeared to be relatively...
I did disassemble and clean all the carburetors. Also checked and cleaned the valve seats. I did not do a fuel pump pressure test. I'm not exactly sure how to perform the test on this model with...
Okay, I did find a test procedure for the primer solenoid. Plan to do that first thing tomorrow morning. Hopefully this might fix the problem.
Hey Fishinbound, I would definitely use the XD-50 for the breakin process and to run under normal operations. I just replaced the powerhead on my 2001 Johnson 90 HP, but I'm having a few startup...
I had to replace the power head on my 2001 Johnson (J90PLSIF) 90 HP. This is the V4 Looper 60 degree model. I actually bought this motor blown and due too budget constraints decided to buy a...
Where can I find information such as year model, length and boat specifications on this particular boat? I know the boat is a Skeeter model H-265. I believe the "H" stands for HAWK. The serial...
Thanks
Can someone please tell me what the fuel / oil ratio for this motor is:
Johnson 75
Model: J75TRLCSA
Serial Number: J5365080
Thanks,
R.Woods