Search:

This is how I did mine. I just used a hand drill, the stainless steel was softer than I expected.

I finally have the courage to cut holes in my boat and install speakers. I have a couple of questions for those who have done this before.

2012 Z521

The plan is to place two 6.5" speakers in...

+ 1 on the additional vent holes

https://twitter.com/McConnellPress/status/1229468071884095488

Does anyone know if this is a new program. Pickwick would definitely benefit from this if it works.

https://twitter.com/McConnellPress/status/1229468071884095488

Is this a new technique? If it works we need this on Pickwick!!!

HaHa, found it on the cord tag AFTER I removed it from the boat.

S/N 2011PCS107306

Thanks for checking on this.

I emailed Dual Pro before I started this post and specifically stated that my unit did NOT have the Delta Volt label. My question was - "I would like to know if this charger is suitable for...

THANKS!!!

I have a Pro Charging Systems, Professional Series with 4-15 amp banks. It was factory installed on a 2012 Ranger, so manufacturing date of the charger is probably 2011. This was before they...

What are the speed numbers for 250hp SHO's that have been reprogrammed to 300hp

My units have acted this way before. It happened when the battery was low. Running the big motor to charge the battery could be why it got better.

Just curious, what functionality do I loose in legacy mode? Does it effect image quality?

Evidently it was running in legacy mode before the rat attack and I had good image quality on down and...

Thank you, I stand corrected.

Any chance I can share waypoints through nmea only? I don't need map sharing.

Again, thanks.

This is how I left it setup. What do you mean by limited waypoint sharing? I thought I lost all way point sharing without ethernet. Limited would be better than nothing.


I can understand the...

After trying all different combinations of units/settings/resets I stumbled across the culprit.

All of my Local/Global settings were correct, but my sonar source keeps reverting back to "single...

I'm still having trouble with Global and Local settings. Could it be a problem with NMEA 2k?

I can't view sonar from the TM on one unit and view sonar from a different source on another unit. ...

My 520dvx was a 2001 model that I bought used in 2006. I owned it for 11 years and eventually had to replace all of the compartment lids (except livewell) because of sagging. I think Ranger fixed...

Great all around boat, easy to fish out of and very stable when on the trolling motor.

Check the compartment lids for sagging. Put some weight on the lower unit and check for flexing in the...

I'm getting ready to install speakers in the same location as yours. Any advice on hole location? I'm not sure how much depth is available.

367073367074

Same here.

I have been considering the same thing. The passenger does get a little relief from the wind with the 1/4 console, but its not much. I have a center seat and there is definitely more wind in the...

Remove the two outside seats first and then you will be able to remove the center flip seat. Keep the current seats.

Thank you, I remember the discussion on here but didn’t remember the brand.

Just lost one and want replace all five, and at the tire store.

I'll second this.