Boat scale can be different for different boats. Factory default is zero. Try it. Your issue often is boat scale related. However, if your boat scale was at -2 previously, and it was working fine,...
Type: Posts; User: catdude28
Boat scale can be different for different boats. Factory default is zero. Try it. Your issue often is boat scale related. However, if your boat scale was at -2 previously, and it was working fine,...
Sold my Shimano DC’s and went all Daiwa Tats.
I alway used the Seacured magnetic lockout. It stays attached to the trailer so I didn’t have to leave it in the truck. I had to use a lockout because my driveway is included upwards when backing...
Agree. If you really want to spoil yourself, spend a bit more than 300 and look at the Zillions. The Tatula SV LE (limited edition) is less than the Zillion, not quite as good, but equivalent to the...
First thing to do in that scenario is to check that fuse. If good, do a bank swap and see if the problem follows the charging bank or the battery.
SEM outdoors is the Canadian retailer for Ionic. He is in Ontario. Have a look also at Tournamentlithium in Toronto. They carry some good brands also including Monster Lithium. Shipping large items...
It’s a good battery. I used one in one of my rigs for several years. Peel off the labels to expose the caps so you can monitor the water level. It is not really a maintenance free battery if you...
Probably nothing wrong with the switch. Can’t tell you how many times I have read here on BBC about those bow switches going off on their own after fishing in a hard rain, and then being fine when...
My breaker bar and torque wrench stay in the truckle of the time, with the correct sockets. I don’t see the need for my impact driver for roadside emergency.
That's how I would do it. Plastic, starboard, etc. Then I would just epoxy them in
My last Ultrex I had for five years. Only thing I had to do was to change the bushings once. First Ultrex, when it came out in 2017, I had the typical foot sensor problem initially, which MK...
My Lund Impact sits in my driveway with the cover on. It's not necessary to do all of the snaps. I do four on each side. Saves time and effort
Odyssey lists MK and DP chargers from 6 to 15 amps as approved, and some other brands. I once called them to ask why the MK PC 10 amp chargers were approved, but not their 15 amp chargers. Answer...
That is a very heavy load of electronics even without poles and livewells. I would prefer to keep my crank battery isolated so that I am sure that I am getting back to the dock. The 27 may work for...
Although I think all three are very good, I would stick with Merc. Simple reason is that I have a great relationship with a fabulous Authorized Merc Service Centre.
That would be my best guess too. Can’t see a roller scratching like that. The rollers rub, with residue cleanable with acetone, but they don’t scratch. Loading off centre, just once, each side,...
Of those 18 brands that you have listed, the only five I would consider in your situation are Ranger, Basscat, Stratos, Skeeter, and Phoenix. No need to discuss the various reasons for eliminating...
These are best for low freeboard boats like a bass boat.
Agree. In Canada, an NRX is about 1000 Canadian dollars with tax in. I can build myself nearly 3 customs, either on NFC, or Batson RX10, just as good, if not better, for 1000 dollars. The reel seat...
I'm in Canada. Had a large local tire shop put 4 brand new passenger tires on my 2015 P2 trailer. Had a another local tire shop replace a passenger tire with an identical one on my 2019 Classic...
Try pulling off your prop and putting it back on turned 180 degrees
Good video. I remember building some new bunks for my 2010 Puma. Rip the boards, taper the front, chamfer the back edge. Placement had to be absolutely perfect because the bunks just make it...
heading up
Pretty sure I've read that the bolt pattern is the same for Quest and Ultrex/ Fortrex, but the bolt holes of the Quest are a larger diameter
As long as it has a separate selectable AGM setting, it should be fine. If the wet cell and AGM setting is one and the same, I would not chance it.