Multiple kastking speed demon and bassinator reels
All reels are 8:6:1 right hand reels.
All are in great shape.
No older than a year.
I have Several kastkin speed demons and bassinator....
Type: Posts; User: blanx
Multiple kastking speed demon and bassinator reels
All reels are 8:6:1 right hand reels.
All are in great shape.
No older than a year.
I have Several kastkin speed demons and bassinator....
I added a dual display mount this year. Over the trolling motor pedal and my shin hits the lower display.
Does anyone else think the 2 pedestal bases are to close to the trolling motor? I feel like I need to move it back about 1 more base. The major question is can I without it being in my...
09 z9.
I have the color codes.
I'm looking for a pinout of the ecm connector.
It looks like all of the grounds go there as well. I have 1 pump that I believe if I replace the wires to the...
Did you find where the ecm harness connects to the pumps factory wires? My first try is going to be a new set of wires from there to the pumps
I have a few questions.
2009 z9 cdc
I have a livewell pump failure.
When I hit the button on the dash the light flashes. I have tried to reset it the light goes out but it does not fix the...
I just found a deal on the 1242xsv that put the price lower than any of the echomaps and the 1222. It's incredible.
I'm sure this has been asked and answered already.
Looking at different options I see 3 for the exact same model.
Example: garmin 1242xsv keyed
garmin 1242xsv with transducer
...
Sorry. 2b125549
I recently had a 2008 250 proxs sn:1b705057
I replaced it with a 2016 250 proxs sn:<2b125549>
It's on a 2009 nitro z9 cdc
Prior to the swap the trim guage worked great. Now it wont work. ...
2008 pro xs l 250hp
Sn 1b705057
Had an issue 2 weeks ago. I dropped it at the shop and they just informed me the #6 is destroyed. The engine still starts oddly enough.
So now I need options....
i was able to use the software to download the liveshare data. it loaded it to my PC. i cant get it to overlay my tracks/recordings over it. but when its in the helix it loads all the data the...
sorry if this has been answered before.
I am trying to map a small lake. I found 85% of it was already done on liveshare. I downloaded it and put the .zip file on my card.
I am trying...
Since I already ordered the part should I change it anyway?
So I went out today. Did not have to unplug. She ran fine. Any ideas? Could that switch have been stuck and driving down the road broke it loose?
But I had a killer day a 5lb15oz and 4lb10oz
I'll either take it to the lake this week and see if unplugging works or fill a horse trough and run it at the house
That's the switch I'm talking about.shift position switch. I believe its part number 889514A01.
Sn is 1b705057.
What will it do if I disconnect it ?
I thought the one on the engine told the pcm it's in gear or netural so it would stop you from over revving in neutral. My vessel view gave me an over speed when I was In gear at 1700 rpm when i...
Yesterday I was out everything was going great. I stopped for a few and tried to take off and the boat wont go over 1700 rpm. I think it sounds like the neutral switch on the engine.
I've...
I have a 2009 Nitro z9. It came with a 26p tempest prop. The hole shot sucked. I switched to a 25 Fury. It ran much faster and better hole shot. I was running 5800rpm
After years of...
I tend to flip it to my target. I do this to keep the splash down and I am more accurate than over hand casting the long tagline with a weight attached. I use the flip to get under docks,...
i've waited several minutes still no help, powder coating makes them very sturdy guess that will do. :)
thanks for the help. im using pure plumbers lead. its very soft. it appears that alot of th 1/16oz are a problem. i kinda figured powder coating them would fix it but im anal some times...
Hey there
i've been using the Shake-It with Screw-Loc, Flat Eye SRH-6M-SLA
I get perfect molds for each one of the sizes except the 1/16 oz. each one of the 1/16oz seems to be very lose around...