I’ve not had any issues, not sure what he did but I gained 250 rpm.
Type: Posts; User: Michael33
I’ve not had any issues, not sure what he did but I gained 250 rpm.
You need to have the fury worked, I’ve got a 23 pitch tempest that I can turn around 5900 with two people but it’s about 3 miles an hour slower than the fury, it doesn’t have a tendency to walk as...
2022 cx19, 225 Merc, 23 fury that’s been worked. 4 lead batteries, 2 10” helix at the bow, minnkota ultrex, and 15” helix at console, also running 2 10’ talons and dual console. Me by myself and full...
Thank you
Ok I’m gonna do that when it warms back up, does anyone know what the part number for breaker or switch is ? Called caymas and was told they couldn’t ship me any electrical parts due to liability....
Cx19 2022 model, the nav and anchor light switch on the main panel will not illuminate and lights don’t come on, the bow switch isn’t doing anything either. All other switches at the main panel work...
Drew tech got them back in stock and I’ve got one on the way
Ok I emailed him with pics and dimensions of mine so I can get the correct one, thank you !
Ok where did you purchase? Says it’s backordered on their website, haven’t found that one anywhere else.
I’m interested in one of these rollers, is it the ult-4 or ult-4lc. Don’t know what the difference is, drewtech website says the latter is for new skeeter and phoenix. I have a benchmark trailer and...
I tried a worked 24 tempest on my CX 19, my 23 fury is better. I could barely crack 5800 RPMs at 68 mph with the tempest with a full tank of gas two blades and two people, the 23 fury I’m able to...
Mine will stay on 100% for probably the first 10 gallons then will drop slowly to around 50% and once you get below that it starts dropping like a rock, I recently put 41 gallons in my boat and it...
OK Thanks for the info, it sounds like it’s gonna be more trouble than it’s worth, I am going to replace the Jetstar tires with the Goodyear endurance d range tires which are made in America, I...
? I like the look of the low profile wheels and tires, does anyone know what size wheel and tire that is on the CX 20 or 21 and if they will fit my benchmark trailer for the CX 19. Wanting to go with...
Love mine, 55 hours so far, rides and handles great, 72 with just me in it with two talons and gear.
I have the same exact boat, same prop 225 pro xs, not sure what gear you have but I’m running 2 talons, standard lead batteries, with me 170lbs, normal gear, half full live wells and a half tank of...
I’ve got the same boat except for mine has a 23 pitch fury, that’s way too slow that boat should run 70 easily. Like above check for full throttle operation, how deep is the motor? Is the trim...
Yes I agree, does not seem to take much trim to lift the hull. Dealer has the hydraulic jack plate so they are letting me know when they can install it, will be nice to do that on the fly, they got...
Not sure about what hole but anything over aroujd 6 or so and it goes into tilt mode, no way I could run that high. I can run as high as 5 but it becomes unstable over 60 and handles a lot better...
Ok ! My trim is in increments from 0-9, I typically run on pad between 3-4
Sorry been busy with work but the dealer is going to take care of the nut issue because it’s going in to swap manual for a 10” hydraulic JP, after I saw the performance difference I think I’ll be...
Ok will do !
So I was able to get out this afternoon, I ended up raising Jack plate another 3/4 of an inch, so the dealer had it set At 4 1/4 inches, and it is now 3 inches prop to pad. It made a huge...
I will get that adjusted! Yes she wants to go fast, have no doubt it will break 70 easily !
Ok awesome, I’ll be down at the river this weekend for a few days so we’re gonna play around with some of that, I think that little bit of slack in my steering wheel is contributing to my Chine walk...