Thanks Smallie, that sounds like a good starting point. I did try the two props I have the day after I put on the jack plate but ran out of daylight before I could really start adjusting anything....
Type: Posts; User: dstokley
Thanks Smallie, that sounds like a good starting point. I did try the two props I have the day after I put on the jack plate but ran out of daylight before I could really start adjusting anything....
I have a 2006 G3 Eagle 175 with 90 Yamaha 2 stroke. I just installed a 6" Vance manual jack plate. Can anyone give me a recommended prop to pad height from experience? I have read on the xpress forum...
I have a 2006 G3 Eagle 175 with 90 Yamaha 2 stroke. I just installed a 6" Vance manual jack plate. Can anyone give me a recommended prop to pad height from experience? I have read on the xpress forum...
2006 G3 Eagle 175
2005 Yamaha 90 2 stroke (mounted in 3rd hole, only one hole left to raise motor)
13.25x15 power tech red3 ss prop
SE sport hydrofoil
WOT is 5400 rpm & 41 mph (2 people, gear, &...
Not sure if anyone is reading up on this but may help someone down the road. I got my hands in a 13.25x15p power tech red3 ss prop and my wot rpm went to 5200-5300 and 38-39 mph gps. Originally with...
Not sure if anyone is reading up on this but may help someone down the road. I got my hands in a 13.25x15p power tech red3 ss prop and my wot rpm went to 5200-5300 and 38-39 mph gps. Originally with...
Gotcha sir. I sure appreciate the info. I’ll have to raise mine up just to see the difference, like you said I can always go back.
Did you see a big difference when you raised the motor up? I’ve been thinking about raising mine as it’s in the 2nd hole too but for rpm reasons. Even with the hydrofoil I can only trim about halfway...
Hey Jim, not sure if you have already installed a hydrofoil, but I have the same boat with a 90hp Yamaha 2 stroke and the hydrofoil helped out a lot on mine. I have a quicker plane time and the bow...
Thanks. I'm going to try and get my hands on a good used one to try out.
Hey guys, has anyone ran a 13.25x15p ss prop on a 90hp 2 stoke? I’ve got a 17.5 g3 eagle and only getting about 4600 rpm wot with my solas ss 13.25x17p. Just looking for some ideas/info. Thanks.
Thanks, I will post over there as well.
Hey guys, has anyone ran a 13.25x15p ss prop on a 90hp 2 stoke? I’ve got a 17.5 g3 eagle and only getting about 4600 rpm wot with my solas ss 13.25x17p. Just looking for some ideas/info. Thanks.
Ok, so you are running a 16p 4 blade. What kind of RPM are you getting at WOT? I've read on here that a lot of people don't prefer the hydrofoil but I saw a big difference on my boat. You boat weighs...
I have a few questions/needing advice. I recently purchased a 2006 G3 Eagle 175 with a 2005 Yamaha 90hp 2 stroke. It currently has a Solas 13.25x17 pitch ss prop on it that was on the boat when I...
Thanks. I’ll double check it. It was set to 6P I’m almost positive. I rotated the adjustment screw on the back of the tach. I read on here that could sort of clean the connection off.
I have a few questions/needing advice. I recently purchased a 2006 G3 Eagle 175 with a 2005 Yamaha 90hp 2 stroke. It currently has a Solas 13.25x17 pitch ss prop on it that was on the boat when I...