Did you end up repowering or repairing ?
Type: Posts; User: Mr.Miyagi
Did you end up repowering or repairing ?
These are a tough sell, even rebuilt due to their track record to which you can attest. Part it out .
:thumb up2:
Ordered a Port head for a SHO,shipped in 2 days. Previously ordered it from Crowley,2 weeks went by and when I inquired got a generic email
No way you have < 10% leakdown with that kind of peppering ........unless someone rebuilt it and reused that head. What do bores look like ? Pistons oversize ?
Interested in the fuel rails
My 300’s all average 125 on the low end
I assume you have done a leak down test? Where I’m going here is the 2 injector seals to the head on each injector, if they leak you will have low compression as well. But I diverge. I have pulled...
High pressure pump or injectors leaking down. Kill motor and watch voltage it should maintain probably 2.5 V I don’t have Spec for that. But if it drops right off means something leaking down
Just had 1 that had no codes but doing same thing.Was going into limp mode,oil tank on motor going low due to open circuit in oil pump harness.
The one on the port side fuel rail.....3 wires, middle Pink is sensor output (must be idling)
What does YDS say fuel rail pressure is at idle? I don't have YDS dut I check voltage at the sensor and if iI get 3.2 V at idle I know I don't have a fuel pressure/volume problem. Have you checked...
Did he get back to you ? No reply here.
Is this still available? Very interested
Pm sent
Thanks for posting. Got caught by that one once.
:nanner:
50 psi key on then goes to 43 psi after 5sec. 50psi when running.
Good job loading vid, I can't even upload a pic on here :beers:
Sorry went back and saw you swapped the drivers.
Pump would not cause a problem at idle. I think you might have a bad injector driver. There is 2 on your motor.
Have a look up your exhaust tuner ...may have blockage from old piston or other debris. I have had 1 with that code 22 and ended up replacing ECU to fix problem.Good luck keep us posted on what you...
I'll take that if still available
Fresh gear oil and impeller. Bolt on and go. Text 705-44six-7six99 for pics
SOLD!!!!!!!
Moderator please delete. Thank you BBC
Crank any good ?
Sorry to hear guys. If anyone wants to part ways with their blown SHO please pm me.I have a burnt externally offshore 25" 250 that I want to change to 20"
I’ll go $2500