Mercury serial number: 2B118051
Lower unit: 1.75:1
Going across the lake this afternoon and lost all power like I spun a hub. Pulled off, trimmed motor up and checked everything out and saw a...
Type: Posts; User: Bassmaster09
Mercury serial number: 2B118051
Lower unit: 1.75:1
Going across the lake this afternoon and lost all power like I spun a hub. Pulled off, trimmed motor up and checked everything out and saw a...
Thank you, I'll look into it next time I'm on the water
Yeah, they both have the latest software updates. Does a certaib global setting need to be turned on?
Okay...I'm just not sure why it isn't working for me then. Thanks
Is it possible to share 360 between a g2 and a g1 solix?
I have a solix 10 g2 at the bow that runs 360 and a solix 15 g1 at the console, both networked together.
I'm trying to get 360 to show up at the console, but it's just a blank 360 screen.
Any...
Found a used 2.5 degree. Not perfect but a lot closer. The 5 degree would have been entirely too much wedge
Looking to get a wedge for my ultrex to level it up. Has one done this on a z9?
Looking at the 2.5degree vs 5degree
Thanks
You can still watch on bassmaster.com on Saturday and Sunday mornings. Go to the international feed, it's the same coverage as what's on fs1
They're both online now
I have owned the boat for 2.5years now...it has always acted this way since I've had it. Runs fine by myself, terrible with another person or heavy load.
Also had work done on the 24 tempest to add more bow lift, did not help either
Lead acid batteries, and agm. I'm sure the talons don't help either
It was suggested to me to go down a size or 2. So I went with. 24tempest, no better. And actually worse speeds by myself, which makes sense. Rpms around 5600 with 24tempest, 5300 with 26tempest.
Running a 2013 Z9 with a 250 optimax, 2 12ft talons, hydraulic jackplate.
I've owned this boat for a little over 2years now. It came with a 26 tempest, but I have really been experimenting with...
Has any of this helped you cougar? Mine really seems isolated to my solix 10 g2 from what they had me try so far, and from past experiences
Any thoughts?
Update: I tried a few thing humminbird asked me to try to no avail, kept loosing sonar source at bow solix 10. I then directly connected the solix 10 and solix 15 via ethernet cables in my garage. ...
Same here, it has done it off and on for the past year with different software updates...but it is unbearable now, not sure if its coincidence or not.
I have tried this. I unhooked the trolling motor from the #5 slot. Problem still persists
My set up is a solix 15 at the dash, solix 10 and helix 12 up front, with link trolling motor and mega live. Currently using all 5 ports of the ethernet hub. All 3 fish finders are wired directly...
There were no instructions in the kit for such, unfortunately.
Alternatively, I was unable to open any of the links in the faqs for bleeding my hydraulic steering
S/N: 2B118051
I recently installed the mercury uflex hydraulic steering on my boat to replace the old worn out seastar system.
Trying to get all the air out of this thing is a pain. First I...
Fixed. Turns out I wasnt doing it correctly. I did some digging online and found the way to get fluid in it.
With the motor on the safety latch I took the yellow fill cap off. I had my buddy...
I'm guessing I have a bunch of air still in the system. What is the proper way to get it out of my system with what I am describing in above post.
Thank you