Any one have or know where I can get How to info to remove oil injection from a 2008 Mercury 150 EFI.
Type: Posts; User: bokinfish
Any one have or know where I can get How to info to remove oil injection from a 2008 Mercury 150 EFI.
I make handmade fishing lures, woodworking, pour a few worms, fix stuff in general, stay retired as best I can.
If your going all that way go to Falcon; Better fish and fishing on the worst day.
After looking at the pictures, I would go get some marine-tex and fill the voids. I have done the same thing on several boat I have had, one I used personally for 15 plus years after fill with no...
I don't know if anyone is still interested in this blog or not anymore, but I have found the setup I was looking for. I found and rebuilt a 2001 150 Merc and hung that along with the jack plate I...
I just put a 2001 Mercury 150 XR6 on my boat. Now I need to get the right prop on for maximum performance. With the cost of props as it is I would like to do it right the first time. Was thinking of...
I got a Jackplate with a 5 1/2 inch set back I will try that and see what I get. Thanks for everyone's input!!!
Sorry guys. The real question here is which brand/design of OMC prop will work best with the hull. Not all props are created equally, we all know that. Blade design has a huge impact on...
No it isn't vented and fits tight/close to the gear case. This is the first experience with propping a Cobra hull. I've had great success with several other Bassboats hulls. I have a local Prop...
I have a 1997 17'10" cobra w/ a 115 Johnson and I need to replace the prop. (Lost the old prop) . I am trying to find a replacement but need some help. First off I do not have a jack plate the...
I had a similar problem with my pro max (95 200 hp) and it turned out to be the switch box. I'm no expert just my experience.
Sorry!!! GPS 58 MPH 58 hd RPM (analog gauge) this is with the motor at 3.5 in. below pad. fully loaded with my 250 lb butt in it.
I bought a 2001 216 Cobra with a 2001 Merc 225 EFI. I have a few issues I hope you guys can help me with. First the boat, motor and trailer were bought orginaly in Oklahoma. My understanding is...
I did not read each and every post but I must say I have NEVER heard anything good about this type of base plate. THEY S__K!!!!! But why do boat builders continue to use them.? I have a 2001 Cobra...
I have the same problem with mine.. Anyone tried to lock the tilt into one position. Buying a new helm is not an option at the prices I've seen.
I have had the same issue with my boat. The prop was not vented. Holeshot was junk but ran fine once on top. I had the prop vented and no more problems.
Thanks guys!!!!! I'll dig into these suggestions this weekend and see what happens. I'll let ya know. Thanks again
I bought a 2001 Coosa with a 225 Mercury on it. It currently has a tempest plus 25 pitch. It has a great hole shot but WOT it runs 60 at 6000 RPM. Since 5800 is red line on the motor I backed out...
I just bought this boat and i need some of the stickers and the trim that goes across the transom. Anyone know where I could find these parts.