Thanks Randy. I am just wondering why the 12V battery is showing red in the app. I guess I am asking what the red means as opposed to showing amber which would tell me it is charging. Will the...
Type: Posts; User: SVMR
Thanks Randy. I am just wondering why the 12V battery is showing red in the app. I guess I am asking what the red means as opposed to showing amber which would tell me it is charging. Will the...
I have a power pole charge hooked to one 12V lithium and two 36V lithiums. When plugged in to charge the 36v in my app are showing amber which indicates charging but the 12v is showing red even...
I have a bbt single dash mount for c boats for sale in the electronics section. I have an L boat on order and took it off before I trade in.
Those are my exact results! Thanks Ghost!
My top end speed is the same with either prop when the boat is loaded. The three blade is faster without a load. By the way acceleration with the fury 4 is incredible. It seems that you get to 50...
Update. I got a hold of a 25p fury 4 to run. I am turning 5900 rpms at 71-72 with a full tournament load and full livewells. It runs about the same without a load. This prop definately shines...
Thanks for the input guys. I am planning on using my 3 blade and this new 4 blade depending on my needs that day or time of the year. I guess my main question will be rpms. I also live at 2000ft...
I have a couple questions about this setup. First off I have been running a 25p 3 blade fury with good overall performance but can only turn about 5750 to 5850rpms with a top speed of 74.7. I have...
Is that a gap between the jackplate and the transom? If it is you need to trim out the plastic so the jackplate sits flush (full contact) on the transom. Hope this helps.
From my understanding, the running surface is exactly what it sounds like.... the middle three feet of the hull. That being said, the outside of the "running surface" or the outer section of the...
24 Fury should run 72-73. 25 tempest 73-74. Both good props but fury will have better holeshot.
That hose should be easy to find once you chip out some foam, its in there! I think the port side is open to the gunnel if I remember correctly. If not there should be a tube to run through to...
I have installed speakers in that boat in the location that you are referring to. First off, you will need to remove the seats. The port side wires will need to be routed back to the port seat and...
That wire should be the jumper wire to the cranker. You are correct in thinking that this has to do with the jump start position on the battery switch. When you use the jump start function on the...
You want to run that motor at 5800 to5900 rpm to get the most out of it. Raise the motor! You will get more revs. Check your height below pad to center of propshaft, should be between 3 to 3.5".
Sorry upsman, I forgot to post the height below pad. It's about 3".
The boat is an early 2014 built in july 2013 so the motor is probably a 13. It is the wingmaster gearcase. At top speed I am turning 5850 to 5900. The speed is no lie. I was surprised myself as...
Just curios to see what others r running on this boat with this motor. I run a 25 Fury (came from ranger that way) with an 8" slidemaster, and as of now I don't see a reason to look for anything...
Just like above, but what elevation r u at? Also just to make sure, its on a merc 250 pro xs?
I have never replied to a thread before, but this topic is something that I feel the need to put my two cents in on. I rig boats for a Ranger dealer in Washington state and am familiar with all the...