I put the shims on both inside and outside brackets from the middle brackets to the front, no shims on the rear brackets.
Type: Posts; User: JMV
I put the shims on both inside and outside brackets from the middle brackets to the front, no shims on the rear brackets.
I made shims out of 1/4” and 1/2” starboard for my trailer, had a similar issue. I used 1/4” for the middle brackets and 1/2” for the front brackets. It helped take some of that bow weight off the...
Pm sent
445986
This is how I have my large center compartment on my 721, the smaller center compartment is mostly used for life jackets and rain gear.
It’s amazing watching fish react aggressively or not react at all to your presentation on LS. It’s addicting just looking at that screen all day and seeing what’s happening or not happening around...
Aaah! Thanks Wayne
What Y cable is needed to share a non mega 360 with an HDSI transducer to a Gen1 Helix DI 9? Trying to help a friend with an install.
Thanks,
Jason
Perfect, thank you!
Ok, does the cable just drop straight through the motor head?
Has anyone replaced a built in Mega Di transducer on there Ultrex? Today, I unfortunately severed the transducer cable for the built in Mega Di transducer on my Ultrex. It got caught in hinge point...
I’ve fished 100’s of hrs out of my fathers 04’ 521 and in comparison to my 17’ 721 the Phoenix is more nimble when it comes to maneuvering around docks and tight places. For a 20’11” boat the 721 is...
Been running a 12” atlas since day one. Hole shot is great fully loaded, ran it up to 78 mph solo and 72-74 consistently loaded with 2 guys. Hardly chine walks and runs better a few bumps down from...
Haven’t had any significant issues with the boat, motor and electronics. Some minor issues with the trailer; replaced “old” factory bow roller, MM has now upgraded the bow roller. Trailer plug had...
No problem. Haha, see you out on the DD sometime! :thumb up2:
I have regular and deep 3700’s on the bottom. I took out the dividers that we’re originally in the bottom tray and that allowed me fit more boxes in the bottom. The sliding tray easily clears the...
A bungee would definitely secure it really well, but I haven’t had it bounce off the rails in rough water yet. If you’re constantly running really big water, I would strap it as a pre-caution. The...
389491
Made a similar sliding tackle storage system for my 17’ 721 with PVC board and starboard for about $100.
Group 31 X2 has been awesome, running 3 Helix’s, 360, Hydrowave, dual poles, both wells with no issues
I got mine from Daryl at Iguana Graffix, same font as the Phoenix decals. :thumb up2:
Thank you guys for the feedback, just placed an order for the battery.
I'm looking at the X2 Power group 31 battery form Batteries and Bulbs for my starting and electronics. I'm looking for some feedback from those that have or are currently running the battery for...
Either the breaker is bad or that breaker is your main for all your accessories and not connected to your TM...My boat has two breakers; main power & TM.
Thank you sir
Thanks Wayne, so the only transducer that can actually connect directly to the Ethernet hub is the 360? By splitting the Mega Si transducer with a 2D ducer mounted on the trolling motor do you still...
Can the Ultrex Mega transducer be connected directly to the Ethernet Hub or a single unit to share (2) transducers? There would be a single Helix 12 G2N Mega Si mounted at the console sharing two...