Search:

24 TXP OT4

24 and 25 Fury 4

25, 25.5, 26, and 27 Bravo Xs

24 Razor 4XL

Had the 26 Bravo for 3yrs, and Sold the boat with the 26 Bravo.

24p Tempest props are a bit off from the box. You will probably need a 23p set to about 3- 3.5in below pad. The 23p pro seires is another option as well as a standard Razor 3 blade from Mark.

http://www.bbcboards.net/showthread.php?t=922810

This what you are talking bout?

Stock 26p Tempest are usually junk. Jackplate setting will all depend on your load distribution, and total added weight along with prop and prop work. I know its not a direct answer, but it is many...

If one of your spikes is on a hard spot like a rock where it does not penetrate it won't hold you. If one is in a softer bottom, it will flex in the bottom. If one spike hits bottom faster the boat...

+1

Never had a problem with either Atlas I have owned. Never hear too much bad about Bobs. Cant speak much for the Sea Star. Either way each will do what you want. If I were to do it again. Price...

All indications are bad prop due to the high slip. Prop slip will change as your weight changes, but you typically see a drop in RPM to accompany the speed drop. 6K RPM would be the upper limits...

There are a ton of variable that need to be considered. All those small additions/upgrades to the FX can make or break somebody's value to the added cost. For the weekend angler or small tourney...

Yes its on a timer.

Done excellent with accu cull elites

Something along these lines. Your prop is too close to the housing.

go down to a 23 tempest or 22 pitch Bravo. Yes there is a Vented 23T1, but its has a small diameter. You could also have the 25T1 pitched down, as the 25t1 is a bit large for that boat.

The trim relays are a frequent problem and they will work intermittent at times. Dont rule them out

Could be water pump. Were you in rough water or turns?

An 80 is plenty for that boat.

Any of the Optimas will last you all day. The difference will be how long they last you in terms of years and days.

The FXP will work good, but I'd sell the FXP and use that money to have the 25p worked by Mark. The vented prop will work fine.

same pitch

about 25K

I did read and comprehend what you wrote. I told you what I would do in your case and why I would do it which is what you asked for. Maybe I'm just a little too detailed for you. Maybe I actually...

You welcome! That not negativity, that honesty, and apparently you can't handle it.

Well look at it this way. Your ECU is flashed which is a warranty breaker if identified as the cause for failure then warranty replacement could be denied. So you are already behind the power curve...

There are no cons to that motor.

Could be a bad transducer