Then it’s even more parts and work, it can be done but price will probably be horrible:)
Type: Posts; User: Gasglad
Then it’s even more parts and work, it can be done but price will probably be horrible:)
Yes I figured it out. I answered you in your own tread.
Yes there is a kit. Its not cheap for us in Scandinavia. I did it on my engines.
It is a new shaft with bearings, new studs,new gear shifter parts and chims. It is not a drop in solution you will...
Yes. With the right parts.
Search for your engine expand the files for your engine and there you have it.
379050
Thank you! I took down one of the gear cases last night and saw that I needed the 20" shaft kit and 5 shorter studs, of cause it will need to be shimmed in.
Yes.
I wanted 20” Verados it replaced a set of 300sx 20” but Merc never took any 20” Verados to Europe last spring so I took what I could get.
I don’t have a regular transom it is just a plain surface and 12” jack plates. So of cause I will adjust the height so it fits a 20” inch transom
Well I start with my serial numbers 2b638267 and 2b638043
I have 25" rigs but would like to go down to 20" since after testing they sit quite high and I would benefit from a bit extra stability...
Have 2 Verado 300 22 hour each. No sign of making oil.
It is gone again
https://450r.mercuryracing.com/450r/
I have to speculate a little, I think you will see a bit of light in the tunnel in the US, Last Year Mercury Europe made an estimate on engines needed for summer 2019 these engines were built first...
It is probably a coil shorting out. Mine did the same. Was a bit hard to figure out since it needed to heat up a bit before the faulty coil shorted.
So you are saying that the V8 wants more fuel then the Opti?
Sound fuel related...check for debris in the tank as well.
Faulty screen
Got a delivery from my dealer today on my two Verados a month early
It is a general issue a defective part from factory. So make sure to get it done so you don’t get shifting issues
Have installed 4-5 system in the last 5 years, used it in my own boat for 2 years, works perfectly.
I ordered two Verados in September was told April. Right rotation engine is ready for delivery as of today and left is scheduled in two weeks. I am happy!
I am in the north of Sweden have used a Suzuki 750AXi to plow snow. It works great as long as you have somewhere to put the snow a bit downhill. It can't really build piles. That can be cured if you...
It is quite ruff to ride, the Ohlins shocks are stiff and with the setup geometry it really want to turn. It gave 101 hk on the dyne on regular fuel. So it is nothing for a cross-country ride but it...
An old Sportster from -86, except basically nothing left from that year.
Hammer Performance has done a great job on the engine, 1250 big bore, and worked heads, new cams, Mikuni carb, Ohlins shocks,...