I have the removable 2nd console on my Z20. My glove compartment was constantly coming loose. I drilled holes and bolted the glove compartment down and it hasn't come loose since. I've had enough...
Type: Posts; User: TCS600
I have the removable 2nd console on my Z20. My glove compartment was constantly coming loose. I drilled holes and bolted the glove compartment down and it hasn't come loose since. I've had enough...
I am running 5 lithium batteries on my Z20. 4 on one charger and one on a single. I bought a dual pig tail that plugs into both chargers. I then only need one cord to plug into my boat.
I did the recall in Nov 2022. Just blew out two bearings on one trip. Not sure the odds of that, but they were within 150 miles of each other.
I had to tighten pretty much every screw/bolt on my 2022 Nitro, including the winch stand.
Same issue here. When I took mine in for a couple other warranty items, I asked them to fix it. Works now.
I have 5 lithium. 1 dedicated solely to electronics. Cost $310 for Chins battery as my 5th. Not worried at all about sitting in the wind/current all day, although my Garmin Force uses much less...
Yep. Plug with 4 female ends? That's where I plugged mine in, after trying to find one in the engine area with no luck. I have 22 Z20 with 250 Pro XS
Just switched from Minn Kota Ultrex 110lb thrust to Garmin Force. To each his own, but I really like the Garmin. Plus, my electronics are all Garmin, so it works for me.
OK. I bought it. This one's on you!!
Separating all electronics from cranking and putting them on 4th deep cycle. You have a brand?
I have four tracker lithiums (3 deep, 1 crank) and I am adding another. Anyone know about these HiMassi batteries? $299 on Amazon with good reviews. Figured what the hell...
Amazon.com: 12V...
Paintchipper, don't want you to think I'm ignoring you. Not sure if you were talking about my colors or another.
12" Garmin on mine
I went simple and used the rubber grommets that came with the power poles. Drilled four clean holes and it worked out great. For looks, I separated them, two on right, two on left. I put my pumps...
I'm lucky if mine works at all. Been doing this awhile so I don't really need the gauge.
I have the same boat. Didn't have your issue, but I quickly found there were numerous connections, screws, nuts, etc... that simply were not tightened down at the factory. I spent a few hours just...
Mine got delivered a little late, but then sat at the local Bass Pro for two - three weeks. My personal experience was I had zero contact or updates if I didn't call.
12 inch Garmin mounted there on Ram Mount. No issues. Make sure you clear your trolling motor when putting it in and out.
I drilled 7/8 inch holes in the trailer, ran a fish from front to back and pulled wires through. The only reason I went that big on the hole is because I had difficulty pulling the wires out with a...
470851
470842
https://photos.google.com/search/_tra_/photo/AF1QipPyfKafUE5Pr_s4xU_Yl2UHMH5xqoGX-mJFScEa
Update: Delivered 11 ago to Bass Pro Store. Been sitting outside on the lot ever since. They have to install the trolling motor and thats it.
So you're saying I should spend 75k and walk away? I waited two months before hearing anything and when I did, I was told the boat was in production, that's it. What if BP had a computerized...
Well, you don't need to understand. I paid a ton of money for a boat and feel that much money, at a minimum, buys me an update every couple weeks. Especially with all the shortages in the...
Getting very little updates on my production. Last I got was the boat is on the trailer and engine getting put on. That was over a week ago. Anyone know if I can just call the factory directly and...